User's Manual

VX-920/-970 SERIES OPERATING MANUAL
20
SELECT ABLE T ONE
Press the assigned programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-defined
tone table. You can operate using the indicated sub-
audible tone in the Selectable Tone mode.
DIRECT CH#1 TO #4
Press the assigned programmable key to recall the
Dealer pre-programmed channel directly.
REC/PLAY
(
VOICE STORAGE: OPTION
)
This function allows your radio to record a received
voice message, and to play back the recorded audio.
It requires installation of the optional Voice Record-
ing Unit.
Recording;
Press the assigned programmable key for 1.5 sec-
onds to enable the Voice Recording Mode. When an
incoming signal is received (the squelch opens and
audio passes), the incoming audio will be recorded.
In the 16-key and 4-key versions, the “
” icon will
flash during audio recording, and the “
” icon will
remain on once recording is complete.
Playback;
Press the assigned programmable key momentarily
to play back the last message.
To stop the play-back, press this key again.
In the 16-key version, press the
[
A
]
key to jump to
the previous message while playback is proceeding,
or press the
[
B
]
key to jump to the next message.
You may press the
[
D
]
key, at any time during play-
back, to clear all messages and stop the play-back.
SQL
You can manually adjust the squelch level using this
function:
 Press the assigned programmable key. A tone will
sound, and the current squelch level will appear
on the display.
 Press the MONITOR/LAMP button to select the
desired squelch level.
 Two seconds after releasing the MONITOR/
LAMP button, the display will revert to the normal
channel indication.
AF MIN VR
Press the assigned programmable key to reduce the
audio output to the (lower) level programmed by your
Dealer.
Press the key again to return to the normal audio
output level.
AD VANCED OPERATION
Vertex Standard Co., Ltd.
FCC ID: K6610334620/IC ID: 511B-10334620