User's Manual

VX-920/-970 SERIES OPERATING MANUAL
21
STATUS SET
Press the assigned programmable key to change the
5-Tone status code. To change the status code, se-
lect the desired digit by
[
A
]
key, then change the num-
ber by
[
B
]
/
[
C
]
key, and store the number by
[
D
]
key.
STATUS UP/DOWN
Press the assigned programmable key to select a 5-
Tone status code from the pre-defined status list.
STATUS CHECK
Press the assigned programmable key to check the
5-Tone receive status code. When you press this key,
the LCD display will indicate the “Message” corre-
sponding to the receive status condition per the pre-
defined status list.
LONE WORKER
Press the assigned programmable key to toggle the
Lone Worker feature “On” and “Off.”
The Lone Worker feature is designed to emit an alarm
for 30 seconds when the Lone Worker Timer (pro-
grammed by your Dealer) has expired. If the user
does not reset the timer by pressing the PTT switch,
the radio switches to the Emergency mode.
To revive the radio from the Emergency mode, just
press the programmable key which is assigned the
Emergency feature or turn off the radio.
DTMF CODE SET
(
16-KEY VERSION ONL Y
)
You may send the desired telephone number manually.
To dial a number manually, press the assigned pro-
grammable key, then press the desired numbers on the
front panel’s numeric key. Now, press the PTT switch
to send the telephone number. The DTMF tones sent
during the dialing sequence will be heard in the speaker.
TA S CAN
Press the assigned programmable key to toggle the
TA (Talk Around) scan feature “On” and “Off.”
While TA scan is proceeding, the VX-920/-970 will
search both the transmit and receive frequencies (the
“
” icon will blink on the 16-key and 4-key versions).
When a signal is encountered on the receive frequency,
the VX-920/-970 will pause until the signal disap-
pears (“
” icon will appear but not blink). When a
signal is encountered on the transmit frequency, the
VX-920/-970 will check for activity on the receive
frequency every few seconds (interval programmed
by your Dealer).
AD VANCED OPERATION
Vertex Standard Co., Ltd.
FCC ID: K6610334620/IC ID: 511B-10334620