User's Manual

VX-920/-970 SERIES OPERATING MANUAL
23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SQL
SCN List
BEEP
BELL
Lighting
Lock
Group
SCAN
DW
TA
AF MinVR
Beep VR
Contrast
Pitch
REC Mode
Play Mode
Select the Squelch Threshold Level
Select the Scan List “User” or “Dealer”
Set the Beep On/Off
Set the Bell On/Off
(Bell engaged by sub-audible CTCSS/DCS)
Set the BUSY/TX LED On/Off
Set the Lock function to be Locked
(Key/PTT/Key+PTT)
Set the Operation Group
Set the Scan status
(same function as Scan key)
Set the Dual Watch status
(same function as DW key)
Set the Talk Around status
(same function as TA key)
Set the Minimum Volume level
Set the Beep volume level
Set the LCD contrast
Select the Special Receive Audio Response
ONE: Enables recording one message (max.
120 seconds), and playback from the
beginning of the message.
ROL: Enables recording whenever squelch
opens, and playback of the last 120
seconds.
Set the priority audio on playback mode.
PLY: Playback audio is higher priority than re-
ceived signal
SIG: Received signal is higher priority than
playback audio
DISPLAY DESCRIPTION
Note: The menu “15: REC Mode” and “16: Play Mode” will ap-
pear only when the Voice Recording Unit is installed.
USER SET MODE
(
16-KEY & 4-KEY VERSIONS
)
The VX-920/-970 Series includes a “User Set
(Menu)” Mode which allows the user to define or
configure various settings, such as Beep On/Off,
Squelch, LCD contrast, etc. To activate the “User
Set (Menu)” Mode:
 Press the assigned programmable key for the
“SET” function to enter the “User Set Mode.”
 Select the User Set Mode Item you want change
using the CH selector knob.
 Press the MONITOR/LAMP buttons to select
the status of the selected item.
 Rotate the CH selector knob one click to save
the new setting.
 Press PTT switch to exit to normal operation.
Vertex Standard Co., Ltd.
FCC ID: K6610334620/IC ID: 511B-10334620