User's Manual
VX-P920/-P970 OPERATING MANUAL
7
OPERATION
Preliminary Steps
Install a charged battery pack
onto the transceiver, as de-
scribed previously.
Screw the supplied antenna
onto the Antenna jack. Never
attempt to operate this trans-
ceiver without an antenna con-
nected.
If you have a Speaker/Micro-
phone, we recommend that it not be connected
until you are familiar with the basic operation of
the VX-920.
Operation Quick Start
Turn the top panel’s
VOL/PWR knob clock-
wise to turn the radio on.
Turn the top panel’s CH
selector knob to choose
the desired operating
channel. A channel name
will appear on the LCD.
If you want to select the
operating channel from a different Memory Chan-
nel Group, press the Programmable key (assigned
to the Memory Group Up or Down function) to
select the Memory Channel Group you want be-
fore selecting the operating channel. A Group
name will appear on the LCD whenever the Pro-
grammable key is pressed.
Note: Some models are programmed so that the
operating channels are selected by the Program-
mable key and the memory channel group is se-
lected by the CH selector knob. For further de-
tails, contact your VERTEX STANDARD dealer.
FCC ID: 10334821/IC ID: 511B-10334821
Vertex Standard Co., Ltd.