Operating Manual

VX410/420 Series
Operating Manual
4/9
Vertex Standard Co., Ltd.
Soft
(keys Press / Press and hold)
Functions
[Side 1] [Side 2] [A] [B] [C] [D]
Monitor //////
Squelch Off //////
Low Power //////
Lock //////
Lamp //////
Channel Up //////
Channel Down //////
Scan //////
Follow-Me Scan //////
Dual Watch //////
Talkaround //////
Add/Del //////
Reset //////
Speed Dial //////
Tx Save Off //////
Call 1 //////
Call 2 //////
Call 3 //////
Code Select //////
Code Up //////
Code Down //////
Emergency X / X / X / X / X / X /
ACC 1 //////
ACC 2 //////
Description of Operating Functions
Monitor
Press (or press and hold) the assigned Soft key momentarily to disable the Tone squelch.
Squelch Off
Press (or press and hold) the assigned Soft key to disable the Noise and Tone squelch.
Repeatedly press (or press and hold) the assigned Soft key to resume the Noise.
Scan
The scanning feature is used to monitor multiple channels programmed into the
transceiver. While scanning, the transceiver will check each channel for the presence of a
signal, and will stop on a channel signal is present.
・ To activate scanning:
Press (or press and hold) the assigned Soft key.
The scanner will search the channels, looking for active ones; it will pause each time it
finds a channel on which someone is speaking.
・ To stop scanning:
Press (or press and hold) the assigned Soft key.
Operation will revert to the channel to which the [CH] knob is set.
FCC ID: K6610504420/IC ID: 511B-10504420