Operating Manual

VX410/420 Series
Operating Manual
6/9
Vertex Standard Co., Ltd.
TX Save Off
Press (or press and hold) the assigned Soft key to disable the Transmit Battery Saver, if you
are operating in a location where high power is almost always needed.
The Transmit Battery Saver helps extend battery life by reducing transmit power when a
very strong signal from an apparently nearly station is being received. Under some
circumstances, though, your hand-held radio may not be heard well at the other end of the
communication path, and high power may be necessary at all times.
Low Power
Press (or press and hold) the assigned Soft key to set the radio’s transmitter to the “Low
Power” mode, thus extending battery life. Press (or press and hold) the assigned Soft key
again to return to “High Power” operation when in difficult terrain.
Lock
Press (or press and hold) the assigned Soft key to lock the Soft key, [CH] knob, and [PTT]
switch (except Lock key); this can be enabled to prevent radio settings from being
disturbed.
Add/Del
Add/Del feature can be arranged Scan list by the User.
Press (or press and hold) the assigned Soft keys to delete/restore the current channel
to/from you’re scanning list. When you delete a current channel, “-SKIP-“ will appear on the
LCD for one second after pressing the Soft key. When you restore a current channel, “-
STOP-“ will appear on the LCD for one second after pressing the Soft Key.
Speed Dial
Your Dealer may have pre-programmed Auto-Dial telephone number memories into your
Radio. To dial a number, just press (or press and hold) the Dealer-assigned Soft key for
Speed Dialing. The DTMF tones sent during the dialing sequence will be heard in the
speaker.
Code Select
Press (or Press and hold) the assigned Soft key to enable the changing the 5-Tone Paging
code which is recalled by the [Call1] key.
Code Up & Down
Press (or Press and hold) the assigned Soft key to switch to a higher paging code number
for the 5-Tone Paging System.
Emergency
The VX-417/427 includes an “Emergency” feature, which may be useful, if you have
someone monitoring on the same frequency as your transceiver’s channel. For further
details contact your VERTEX STANDARD dealer.
ACC 1 and 2
When the optional unit is installed, these functions are various uses.
FCC ID: K6610504420/IC ID: 511B-10504420