Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 C4FM/FM 144/430MHz DUAL BAND DIGITAL TRANSCEIVER FT M -3 0 0 DR Operating Manual
Contents Quick Guide .................................................... 3 Safety Precautions (make sure to read these) .............................. 4 Controls & Connections ................................ 8 Transceiver .......................................................................8 Supplied Accessories .................................. 10 Connecting the Power Supply..................... 11 Connecting the car Battery ...........................................
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Quick Guide Turning the Power ON Selecting the Inputting the Call sign The communication mode is automatically selected to correspond to the signal being received. Press the [D X] to manually select the communication mode. Press and hold the [POWER] switch. When turning the power ON for the first time after purchasing, input the call sign of your own station. 1.
Safety Precautions (make sure to read these) Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Make sure to read this manual in order to use this radio safely and correctly. Note beforehand that the company shall not be liable for any damages suffered by the customer or third parties in using this product, or for any failures and faults that occur during the use or misuse of this product, unless otherwise provided for under the law.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Do not operate the device when flammable gas is generated. Doing so may result in fire and explosion. Do not transmit in crowded places in consideration of people who are fitted with medical devices such as heart pacemakers. Electromagnetic waves from the device may affect the medical device, resulting in accidents caused by malfunctions. Do not touch any liquid leaking from the liquid display with your bare hands.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Do not use the device when the power cord and connection cables are damaged, and when the DC power connector cannot be plugged in tightly. Please contact our company amateur customer support or the retail store where you purchased the device as this may result in fire, electric shock and equipment failure. Never cut off the fuse holder of the DC power cord. This may cause short-circuiting and result in ignition and fire.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Keep out of the reach of small children. If not, this may result in injuries to children. Do not put heavy objects on top of the power cord and connection cables. This may damage the power cord and connection cables, resulting in fire and electric shock. Do not transmit near the television and radio. This may result in electromagnetic interference. Do not use optional products other than those specified by our company.
Controls & Connections Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Transceiver ① VOL knob (Band A / Band B) The volume will increase when the knob is turned in a clockwise direction and decrease when turned in an counter-clockwise direction. The upper end is for Band A use while the lower end is for Band B use. ② Display ③ DIAL knob (Band A) 7KH IUHTXHQF\ RI WKH XSSHU EDQG FDQ EH DGMXVWHG The frequency will increase when the knob is turned in a clockwise direction and decrease wh
⑥ D/X key Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 The communication mode changes each time this key is pressed for a short time. WIRES-X will start when this key is pressed for one second or longer. ⑦ BACK key Press to return to the previous screen. ⑧ F (SETUP) key Press the button quickly to display the function menu. Press the button for one second or longer to display the set-up menu. ⑨ V/M (MW) key Pressing each time switches between VFO mode and memory mode.
Supplied Accessories Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 DTMF Microphone SSM-85D Mobile Mounting Bracket Control Cable (3 m) USB Cable Panel Mounting Bracket DC power cable Spare fuse (15 A) Operating Manual (This Manual) If any item is missing, contact the dealer from which you purchased the transceiver.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Connecting the Power Supply Connecting the car Battery When using this radio as a mobile unit, connect the DC power supply cable to the negative ground 12 V car battery. Use the radio in a car with a negative ground 12 V DC system, where the minus (-) pole of the battery is connected to the car body. Do not connect the radio to the 24 V battery of a large vehicle. Do not use the cigarette lighter inside the car as a power source. 1.
Using a microSD Memory Card Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Using a microSD memory card with the transceiver allows the following functions.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Basic Operations Turning the Transceiver ON 1. Press and hold the Power (Lock) switch to turn the transceiver ON. When switching the power on for the first time after purchasing, or after resetting, a screen requesting the call sign of your own station be entered, will be displayed. From the second time onwards, the call sign of your own station entered the first time will be displayed. ● Switching the power OFF 1.
Toggling the Operating Band Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Normally, both operating bands are displayed on the top half and bottom half of the transceiver screen. This is Dual band. With one of the bands selected, change the frequency and radio operating mode. • The selected band (displayed in white letters) is called Operating band. • The other band (displayed in gray letters) is called Sub-band. • Each time pressing the [A/B] key toggles the operating band.
Selecting the Communication Mode Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 ● Using AMS The FTM-300DR transceiver is equipped with the AMS (Automatic Mode Select) function which automatically selects the communication mode corresponding to the received signal. To utilize the AMS function, press the [D X] key to display “DN”* on the display. After receiving the signal, “FM” of “FM” will be changed according to the received signal. *The display differs depending on the received signal.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Fixing the Communication Mode 1. To fix the transmission mode for operation, press the [D X] key to switch the communication mode. Communication Mode V/D Mode (Voice/Data simultaneous transmission mode) Voice FR Mode*1 (Voice Full Rate Mode) Icon Description of Modes DN This is the standard digital mode. Calls are less prone to interruptions caused by detection and correction of the received digital voice signal.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Repeater Operation Communicating Via the Repeater The transceiver includes an ARS (Automatic Repeater Shift) function which sets the repeater operation automatically when the receiver is tuned to the repeater frequency. 1. Set the downlink (output) frequency from the repeater. 2. “ ” or “ ” icon may automatically appear above the frequency. 3. Speak into the microphone while pressing and holding the PTT switch.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Using the Memory Caution The information registered to memory channels can be corrupted by incorrect operation, static electricity, or electrical noise. Also, it can be erased in the event of a failure or repair. Be sure to keep a record of the settings on paper or back up the data to the microSD memory card. For details on saving a backup onto a microSD memory card, see “Set Mode: SD CARD Menu Operations”. Registering to Memory Channels 1.
Recalling the Home Channels Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 1. Press the [F(SETUP)] key. 2. Rotate the DIAL knob (Band A) to select “HOME”, then press the DIAL knob (Band A). 3. Press the [V/M] key to return to the previous frequency. While recalling the home channel, rotate the DIAL knob to transfer the home channel frequency to the VFO operating band. Changing the Home Channel Frequency 1. 2. 3. 4. 5. 6. 7. 8. 9.
Scanning Function Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 The FTM-300DR supports the following four scanning functions: • VFO Scan • Memory Channel Scan • Programmable Memory Scan (PMS) • Scan for specified memory channels For additional details on the Programmable Memory Scan (PMS) and Scan for specified memory channels, refer to the Advanced Manual which may be downloaded from the Yaesu website. VFO Scan VFO scan function scans the frequencies, and detects signals. 1.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Convenient Functions Bluetooth® Operation ® The FTM-300DR has built-in Bluetooth functionality, so hands-free operation is possible ® using the optional Bluetooth headset (SSM-BT10) or a commercially available Blue® tooth headset. ● About communicable range The communicable distance between SSM-BT10 and FTM-300DR is about 10m, but it changes greatly depending on the surrounding conditions and the human body.
Hands-free operation with a Bluetooth headset (VOX function) Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 When FTM-300DR's VOX (automatic voice transmission) function is turned on, you can use the Bluetooth headset to perform hands-free operation that transmits automatically just by talking. Turn on the VOX function according to “VOX (automatic voice transmission) function”.
VOX Operation Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 The VOX system provides automatic transmit/receive switching based on voice input to the microphone or Bluetooth Headset. With the VOX system enabled, you do not need to press the PTT switch in order to transmit, and it is not necessary to use a VOX headset in order to utilize VOX operation. Setting VOX function 1. Press and hold the [F(SETUP)] key. 2.
Band Scope Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 The Spectrum Analyzer presents a view of operating activity on channels above and below the current main band operating frequency as the center. 1. Press the [DISP] key. 2. With the current frequency in the center, the signal strengths of 39 channels bandwidth are shown on a graph. 3. To turn the Band Scope OFF, press the [DISP] key. Press and hold the [F(SETUP)] key £［DISPLAY］£［3 BAND SCOPE］.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Using Set Mode The Set Mode permits configuring the various functions according to individual operating needs and preferences. Set Mode Operation 1. 2. 3. 4. 5. 6. 7. 8. 9. Press and hold the [F(SETUP)] key. The SETUP MENU screen will be displayed. Rotate the DIAL knob (Band A) to select the desired item in Setup Menu. Prss the DIAL knob (Band A). The Sub-menu screen will be displayed.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Tables of Set Mode Operations Set mode no. / item DISPLAY 1 TARGET LOCATION 2 COMPASS 3 BAND SCOPE 4 LCD BRIGHTNESS 5 SOFTWARE VERSION TX / RX 1 MODE 1 FM BANDWIDTH 2 RX MODE 2 DIGITAL 1 AMS TX MODE 2 DIGITAL POPUP 3 LOCATION SERVICE 4 STANDBY BEEP 5 DIGITAL VW 3 AUDIO 1 SUB BAND MUTE 2 MIC GAIN 3 VOX 4 RECORDING Description Set what to display using the smart navigation function. Set the compass display of the smart navigation function.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Set mode no. / item 9 WX ALEAT SCAN 1 DUAL RCV STOP 2 DUAL RCV INTRVAL 3 PRIORITY REVERT 4 SCAN DIRECTION 5 SCAN RESUME GM Description Selectable options (Options in bold are the default settings) Enables/Disables the Weather Alert Feature. ON / OFF Setting the signal reception method AUTO / HOLD 0.5sec / 1.0sec / 2.0sec / 3.0sec / 5.0sec / 7.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Set mode no. / item 12 UNIT 13 APO 14 TOT 15 GPS DATUM 16 GPS DEVICE 17 GPS LOG DATA Description Display unit setting Set the length of time until the transceiver turns off automatically. TX time out setting GPS function positioning selection GPS receiver selection Set the GPS log recording time interval. 1 COM PORT SETTING COM port setting. 2 DATA BAND SELECT APRS/DATA band selection setting.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Set mode no. / item Description Selectable options (Options in bold are the default settings) TX BEACON: ON / OFF TX MESSAGE: ON / OFF RX BEACON: ON / OFF RX MESSAGE: ON / OFF MY PACKET: ON / OFF CALL RINGER: ON / OFF RANGE RINGER: OFF / 1km / 5km / 10km / 50km / 100km MSG VOICE: ON / OFF 8 APRS RINGER (CS) Call sign setting for CALL RINGER 1 to 8 stations 9 APRS TX DELAY Data transmit delay time setting.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Set mode no. / item 26 MY SYMBOL Description Selectable options (Options in bold are the default settings) ICON 1: [/>] Car ICON 2: [/R] REC.Vehicle ICON 3: [/-] House QTH (VHF) USER: [YY] Yaesu Radios 27 POSITION COMMENT Set up the position comment function. Off Duty / En Route / In Service / Returning / Committed / Special / Priority / Custom 0 to 6 / Emergency! 28 SmartBeaconing Set the smart beaconing function.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Restoring to Defaults (Reset) Caution When the All Reset function is performed, all data registered in the memory will be deleted. Be sure to note the settings on paper or back up the data on a microSD memory card. All Reset To restore all transceiver settings and memory content to the factory defaults. 1. Press and hold the [F(SETUP)] key. 2. Rotate the DIAL knob (Band A) to select “RESET”, then press the DIAL knob (Band A). 3.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Specifications ● General Frequency Range : TX 144 - 148 MHz, 430 - 450 MHz : RX: 108 MHz to 999.99 MHz (Cellular Blocked) Channel Steps : 5/6.25/(8.33)/10/12.5/15/20/25/50/100 kHz Mode of Emission : F1D, F2D, F3E, F7W ( ) Air Band Frequency Stability : ±2.5ppm (-4°F to +140°F [-20°C to +60°C]) Antenna Impedance : ȍ Supply Voltage : Nominal 13.8 V DC, Negative Ground Operating 11.7 to 15.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 ● Receiver Circuit Type : Double-conversion super heterodyne Intermediate Frequency : 1st: Band A 58.05 MHz 1st: Band B 57.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Changes or modifications to this device that are not expressly approved by YAESU MUSEN could void the user’s authorization to operate this device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference including received, interference that may cause undesired operation.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Declaration of Conformity Type of Equipment: Brand Name: Model Number: Manufacturer: Address of Manufacturer: 144/430MHz Digital/Analog Transceiver YAESU FTM-300DR YAESU MUSEN CO., LTD. Tennozu Parkside Building, 2-5-8 Higashi-Shinagawa, Shinagawa-ku,Tokyo 140-0002 Japan This device complies with part 15 of the FCC Rules.
Application for FCC/ IC FCC ID: K6620715X40 IC: 511B- 20715X40 Copyright 2020 YAESU MUSEN CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of YAESU MUSEN CO., LTD. YAESU MUSEN CO., LTD. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan YAESU USA 6125 Phyllis Drive, Cypress, CA 90630, U.S.A. YAESU UK Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U.K.
