Operation Manual
9
1. Initial set up
Turn the power on
1 Press the POWER switch.
The power will be switched ON, and the power supply monitor
(LED indicator) will illuminate.
z When the power is supplied from the AC IN jack, the indicator
illuminates in green (DR-1X only).
z When the power is supplied through the BACKUP terminals / DC
IN terminal (13.8V DC), the indicator illuminates in red.
The operation mode screen will appear on the display.
Set up the ID (call sign)
The call sign or ID must be entered for the first time after purchasing, or after resetting the repeater.
After performing a factory reset, the ID call sign setup begins with 2.
1 Touch
[
SETUP
]
to display Frequency screen.
REMOTE
2 Touch
[
F
]
to display the Function screen pops up.
SETUP Ver.1.xxx EXP A1
PANEL1.XX DSP4.XX
3
7
U
P
N
KI
L
N
KI
L
8
7
DO
WN
F
M/V SQL
Tx PWR
HI
BACK
BACK
3 Touch ID SET area.
The character input screen will appear.
SETUP
U
P
N
KI
L
N
KI
L
8
7
DO
WN
F
M/V SQL
Tx PWR
HI
BACK
BACK
ID SET
TIMER
ID AN NO UNCE
MODE/REMOTE
DG-ID
ID M OD E
SQL
R-OFF
T-OFF
DEVIATION
WIDE
4 Touch a character key.
The touched character will be displayed at the top of the screen.
z Each time
[
]
is touched the cursor will move to the left and
erase one character.
z The input screen changes between numbers input and alphabet
input each time
[
ABC
]
is touched.
z The cursor in the input field moves left or right when
[|
]
or
[
|]
are touched.
z Up to 10 alphabet characters, numbers, or the hyphen can be entered.
5 Touch
[
ENT
]
.
The ID setting is saved and the display will return to the Function
screen.
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M
ABC Space
#%^
Caps
ID SET
-
ENT
W D X C6