Operation Manual

19
C4FM DIGITAL CONTROL
• Set the operation mode to “AUTO” or “FIX NORMAL”.
• The transceivers compatible with the remote-control are the FTM-400D, FTM-100D, FTM-3200D and FTM-
3207D.
• Remote control with C4FM digital can be done only when the transceiver DP-ID has been registered to the
DR-1X in advance. Remote operation cannot be performed with a transceiver when the DP-ID has not been
registered, so you can securely manage repeaters.
• When the remote operation is accepted, the repeater responds and the operation completion is shown by
the respective functions on the screen of the mobile transceiver.
ECS (for analog FM mode)
• Set the operation mode to “AUTO” or “FIX FM”.
• Any transceiver with ECS (Enhanced Code Squelch) code can be used.
• When the remote operation is accepted, the CW ID of the operation that has been completed by the respec-
tive function is transmitted on the repeater downlink frequency.
Remote Control Command List (Default setting)
Function Description
C4FM
Analog FM C4FM Analog FM
Code
Display of the
transceiver screen
CW ID
ACTIVATE
Activate the repeater operation
of CH-A and CH-B.
1111 ECS
ø2
Activate Set O
DEACTIVATE
Deactivate the local repeater
operation.
2222 ECS
ø2
Local Deactivate Set S
FIX DIGITAL
Set the repeater to C4FM mode.
3333
ø1
- DIGI/DIGI Set -
AUTO
Set the repeater to AMS (Auto-
matic Mode Select) mode.
Both analog FM and C4FM digi-
tal signals operate.
4444
ø1
- AUTO/AUTO Set -
HIGH TX POWER
Set the transmit power to HI (50
W).
0050
ø1
- High Power Set -
MID TX POWER
Set the transmit power to MD
(20 W).
0020
ø1
- Mid Power Set -
LOW TX POWER
Set the transmit power to LO (5
W).
0005
ø1
- Low Power Set -
EMERGENCY CALL OFF
When accessing the repeater
by a transceiver with registered
DP-ID, select the downlink from
the repeater or the downlink in
accordance with the DG-ID set-
ting.
8888
ø1
- EMERGENCY OFF -
EMERGENCY CALL ON
9999
ø1
- EMERGENCY ON -
ø1: It is only available with the C4FM digital.
ø2: For additional details on this function, refer to page 21.
When remote control is activated by a Digital Code, the status is shown on the transceiver display.
When remote control is activated by ECS, the status is responded with CW ID on the Downlink frequency.