Operation Manual
28
5 Touch
[
PASSWORD
]
twice.
The character input screen will appear.
The touched character will be displayed at the top of the screen.
• Four numeric characters can be entered.
• The cursor in the input field moves left or right when
[|
]
or
[
|]
is
touched.
• After completing the input password, the character input screen
automatically disappears and the input password is set.
6 Touch
[
BACK
]
4 times.
The setting is determined and the display will return to the operation
mode screen.
PASSWORD
Space
123
ENT
z The password input screen will be displayed when the power is turned ON, or after the display has been turned OFF.
Enter the previously registered 4-digit password (default “0000”).
z To reset the DR-1X, press and hold in the
[
SETUP
]
button while turning the transceiver ON à the password input
screen will appear à press and hold the
[
SETUP
]
button for 2 seconds à the reset confirmation screen will appear
à touch “OK?”.
Setting the half deviation operation
1 Touch
[
SETUP
]
then touch
[
F
]
.
2 Touch
[
DEVIATION
]
to display “NARROW”.
The setting will toggle between “NARROW” and “WIDE” each time
[
DEVIATION
]
is touched.
NARROW: Reduces the analog FM/C4FM digital modulation to half.
WIDE: Uses the normal analog FM/C4FM digital modulation.
3 Touch
[
BACK
]
twice.
The setting is determined and the display will return to the operation
mode screen.
SETUP
U
P
N
KI
L
N
KI
L
8
7
DO
WN
F
M/V SQL
Tx PWR
HI
BACK
BACK
ID SET
TIMER
ID AN NO UNCE
MODE/REMOTE
DG-ID
ID M OD E
SQL
R-OFF
T-OFF
DEVIATION
NARROW
Factory default: WIDE