Operation Manual

DR-2X / DR-2XE Operating Manual 17
Setting the DG-ID Number
1 Touch
[
A SETUP
]
or
[
B SETUP
]
to display the frequency set up screen,
then touch
[
F
]
on the bottom of the screen.
2 Keep touching
[
ID MODE
]
(DG-ID).
The DG-ID list screen appears.

8
4



DG-ID
T-OFF
R-OFF
SETUP RXx.xx TX .xSETUP RXx.xx TX .x
3 Touch
[
LOCAL RPT
]
.
The LOCAL RPT DG-ID screen appears.
00 MY RPT
DG-ID LIST
LOCAL RPT
1
DG-ID
4 Touch
[
▲
]
or
[
▼
]
to select the desired DG-ID number to be registered
to the DR-2X/DR-2XE repeater.
When using the DR-2X/DR-2XE as an Open Repeater that anyone may
use, set the DG-ID to “00”.
Name
MY RPT
BACK
BACK
DG-ID 01 Down Link OWN
LOCAL RPT DG-ID
5 Touch
[
Name
]
twice.
The character input screen appears.
Name
MY RPT
BACK
BACK
DG-ID 01 Down Link OWN
LOCAL RPT DG-ID
6 Input the name to be registered to the DR-2X/DR-2XE repeater.
Up to 10 characters may be input.
7 Touch
[
ENT
]
.
The input characters are registered and operation returns to the
LOCAL RPT DG-ID screen.
8 Touch
[
BACK
]
4 times.
The screen returns to the operation mode screen.
NAME SET SAN-JOSE
Q
E
ABC
Caps