Operation Manual

DR-2X / DR-2XE Operating Manual 21
8. Set up DP-ID
Digital Personal Identication
(
DP-ID
)
Digital Personal Identification (DP-ID) is the digital ID number each transceiver is programmed with. The
system manager may operate the DR-2X/DR-2XE repeater functions, and the emergency communication, by
registering the DG-ID number of the controlling C4FM digital transceiver to the DR-2X/DR-2XE.
When receiving the uplink signal containing the DP-ID that is registered to the DR-2X/DR-2XE, the signal is
received and transmitted on the downlink preferentially. In addition, if connecting multiple repeaters via the
Internet, signals containing the registered DP-ID will be transmitted on the multiple repeater downlinks (the
local repeater signals may also be transmitted on the downlink.).
z DP-ID feature
Emergency Transmission Feature
When the DR-2X/DR-2XE receives a signal from a transceiver with a registered DP-ID, the DR-2X/DR-2XE
operates in preference to all operations.
When the repeater DP-ID setting is ON, the signal containing a DP-ID from a C4FM transceiver may be
registered in the repeater DP-ID log.
1 Touch
[
A SETUP
]
or
[
B SETUP
]
to display the frequency set up screen, then touch
[
F
]
on the bottom of the
screen.
2 Touch
[
ID MODE
]
to select the “DP-ID”.
Touching
[
ID MODE
]
switches the setting as follows:
à “DP-ID” à “DG-ID” à “DP-ID” à
The DP-ID display returns to the DG-ID display in about 5 seconds.
3 Keep touching
[
ID MODE
]
(DP-ID) for more than two seconds.
The DP-ID list screen appears.
8
4
DG-ID
T-OFF
R-OFF
SETUP RXx.xx TX .xSETUP RXx.xx TX .x
4 Touch
[
REG
]
.
The Registration Confirmation Screen appears for about 5 seconds.
5 Tune the registering transceiver to the repeater frequency, then trans-
mit in the C4FM mode.
The call sign and Radio ID from the received transceiver are dis-
played.
DTMF
*1111
*2222
*3333
*4444
CONTROL MODE
ACTIVATE
DEACTIVATE
FIX DIGITAL
AUTO
REG
DP-ID LIST
DP-ID Registrasion?
6 Touch
[
OK?
]
to register Radio ID, or touch
[
Cancel
]
to return to the
DP-ID list screen without registering.
If registering another transceiver, repeat step 4 to 6.
Up to 30 DP-ID information data may be registered.
7 Touch
[
BACK
]
3 times.
The screen returns to the operation mode screen.
DTMF
*1111
*2222
*3333
*4444
CONTROL MODE
ACTIVATE
DEACTIVATE
FIX DIGITAL
AUTO
REG
DP-ID LIST
O K ? Cance
DP-ID Registration
Radio ID:xxxxxFT2DR
DTMF
*1111
*2222
*3333
*4444
1
ACTIVATE
DEACTIVATE
FIX DIGITAL
AUTO
REG
DP-ID LIST
F T 2 D R x x x x x