Operation Manual

DR-2X / DR-2XE Operating Manual24
10.
[
Example
]
Advanced Set up and Operations
IMRS (Internet-linked Multi-site Repeater System)
The repeater, installed the optional LAN Unit LAN-01A and connected the multiple DR-2X/DR-2XE repeaters
via the Internet, may be accessed as stand-alone or as a group repeater (Up to 99 units).
User 2 User 4 User 6User 3
User 1
System Manager
User 5
Internet InternetInternet
DG-ID: 01
Default: 01
DG-ID: 03
Default: 03
RPT-C
User 8
User 7
DG-ID: 04
Default: 04
RPT-D
RPT-BRPT-A
San Jose Los Angeles San Diego Las Vegas
North CA: DG-ID 10
South CA: DG-ID 20
All Area: DG-ID 50
DG-ID: 02
Default: 02
RPT-A RPT-B RPT-C RPT-D
LOCAL Name San Jose Los Angeles San Diego Las Vegas
LOCAL DG-ID 01 02 03 04
Default DG-ID 01 02 03 04
Group
Group Name North CA
Group DG-ID 10
Group Name South CA
Group DG-ID 20
Group Name All Area
Group DG-ID 50
USER-1 transmits the uplink signal with DG-ID 01
Only RPT-A transmits the downlink signal.
LOCAL DG-ID 01 (RPT-A)
USER-1 transmits the uplink signal with DG-ID 04
Only RPT-A and RPT-D transmit the downlink signal.
These settings are retained, even if the other members transmit the uplink signal from RPT-A and RPT-D with
any DG-IDs during the time set by the TOT.
LOCAL DG-ID 04 (RPT-D) + UPLINK RPT-A
USER-1 transmits the uplink signal with DG-ID 10
RPT-A and RPT-B transmit the downlink signal.
The other members may transmit on the uplink from RPT-A or RPT-B with the same DG-ID.
USER-1 transmits the uplink signal with DG-ID 20
RPT-A, RPT-B and RPT-C transmit the downlink signal.
The other members may transmit on the uplink from RPT-A and RPT-B with the same DG-ID.
This setting state is retained until the TOT time passes after the last transmission, even if the other members
transmit the uplink signal from this repeater with any kind of DG-IDs during the time set by the TOT.
GROUP DG-ID 20 (RPT-B + RPT-C) + UPLINK RPT-A
USER-1 transmits the uplink signal with DG-ID 50
All the repeaters transmit the downlink signal
These settings are retained until the TOT time elapses after the last transmission, even if the other members
transmit on the uplink of any repeaters with any kind of DG-IDs.
GROUP DG-ID 50 (ALL REPEATERS)
The beep sounds to notify that the TOT is activated and accessed by DG-ID number other than the default
DG-ID.