Operation Manual

DR-2X / DR-2XE Operating Manual 27
C4FM DIGITAL CONTROL
• Requires the optional LAN Unit “LAN-01A” for digital voice storage and playback functions.
• Set the operation mode to “AUTO” or “FIX DIGITAL”.
• The transceivers compatible with the remote-control are the FTM-400D, FTM-100D and FTM-3200D.
• Remote control with C4FM digital can be done only when the transceiver DP-ID has been registered to the
DR-2X/DR-2XE in advance. Remote operation cannot be performed with a transceiver when the DP-ID has
not been registered, so you can securely manage repeaters.
• When the remote operation is accepted, the repeater responds and the operation completion is shown by
the respective functions on the screen of the mobile transceiver.
DTMF (for analog FM mode)
• Requires the optional voice guide unit “FVS-2” for analog voice storage and playback functions.
• Set the operation mode to “AUTO”.
• Any transceiver with DTMF can be used.
• When the remote operation is accepted, the CW ID of the operation that has been completed by the respec-
tive function is transmitted on the repeater downlink frequency.
Remote Control Command List (Default setting)
Function Description
C4FM
Analog FM C4FM Analog FM
Code
Display of the
transceiver screen
CW ID
ACTIVATE
Activate the repeater operation
of CH-A and CH-B.
1111 1111 Activate Set O
DEACTIVATE (LOCAL)
Deactivate the local repeater
operation.
2222 2222 Local Deactivate Set S
DEACTIVATE (ALL)
Deactivate all the linked repeat-
ers.
2221
ø1
- All Deactivate Set -
FIX DIGITAL
Set the repeater to C4FM mode.
3333

3333
DIGI/DIGI Set DD
AUTO
Set the repeater to AMS (Auto-
matic Mode Select) mode.
Both analog FM and C4FM digi-
tal signals operate.
4444

4444
AUTO/AUTO Set AA
HIGH TX POWER
Set the transmit power to HI (50
W).
0050

0050
High Power Set H
MID TX POWER
Set the transmit power to MD
(20 W).
0020

0020
Mid Power Set M
LOW TX POWER
Set the transmit power to LO (5
W).
0005

0005
Low Power Set L
REC MESSAGE
Record the voice message.
PTT
ø2

5555
REC Completed R
PLAY MESSAGE
Play (Stop) the voice message.
P2
ø2

6666
PLAY Completed R
CLEAR MESSAGE
Clear the voice message.
P3
ø2

7777
CLEAR Completed R
EMERGENCY CALL OFF
When accessing the repeater
by a transceiver with registered
DP-ID, select the downlink from
all the linked repeaters or the
downlink in accordance with the
DG-ID setting.
8888
ø1
- EMERGENCY OFF -
EMERGENCY CALL ON
9999
ø1
- EMERGENCY ON -
ø1: It is only available with the C4FM digital.
ø2: When the C4FM digital mode, press the “PTT”, “P2”, or “P3” key.
When using Analog FM mode, hold down PTT, press the “” key on the microphone, and then enter the
DTMF code.
When remote control is activated by a Digital Code, the status is shown on the transceiver display.
When remote control is activated by DTMF, the status is responded with CW ID on the Downlink frequency.