Operation Manual

11FT-1802M OPERATING MANUAL
FRONT PANEL CONTROLS & SWITCHES
[
REV
(
DW
)]
Key
During split-frequency operation, such as through a repeater, this key reverses the trans-
mit and receive frequencies

.
Press and hold in this key for one second to activate the Dual Watch feature, described
in the Operation chapter (“PRI” will be displayed on the LCD, indicating “Priority
Channel” monitoring).

:
Using the Menu, the “Reverse” feature may be disabled in favor of one-touch access
to the “Home” Channel. See page 33 for details.
[
LOW
(
A/N
)]
Key
Press this key momentarily to select the transmitter power output level.
The available power levels are:
LOW1 (5 W)  LOW2 (10 W)  LOW3 (25 W)  HIGH (50 W)
To toggle the display between indication of the frequency and the channel’s Alpha/
Numeric label, press and hold in this key for one second while receiving on that memory
channel.
[
D/MR
(
MW
)]
Key
Press this key momentarily to switch the frequency control among the VFO, Memory
System, and Home channel.
Press and hold in this key for one second to activate the Memory Storage mode.
DIAL Knob
This 24-position detented rotary switch is used for tuning, memory selection and most
function settings. The microphone
[
UP
]
/
[
DWN
]
buttons duplicate the functions of this
knob.
Display
The main digits on the display may show the operating frequency, memory name, or any
of many parameters during Menu setup.
CTCSS
(Continuous Tone Coded Squelch System)
DCS (Digital Code Squelch)
DTMF Memory Mode
CTCSS/DCS/EPCS Bell Paging
Lock Feature Active
Programmable Memory Scan
Priority Channel
Memory Mode
Memory Channel Number
VFO Mode
Home Channel
Frequency/Message Area
SKIP/Preferential Scan ChannelRepeater Shift Direction
Low TX Power Selected
TX Indicator
BUSY Indicator
Narrow Deviation
S- and TX Power Meter