Operation Manual

19FT-1802M OPERATING MANUAL
CHANNEL STEP SELECTION
Tuning steps are factory preset to default increments which are appropriate for the country
to which this radio is exported. You may have a reason to use a different step size, however,
and here is the procedure for changing the channel steps:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “50 STEP.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
select the desired step size (5/10/12.5/15/20/25/50/100
kHz).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save your new setting and exit
to normal operation.
DISPLAY BRIGHTNESS
The FT-1802M display illumination has been specially engineered to provide high visibil-
ity with minimal disruption of your “night vision” while you are driving. The brightness of
the display is manually adjustable, using the following procedure:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “16 DIMMER.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
select a comfortable brightness level (LVL 0 - LVL10).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save your new setting and exit
to normal operation.
ADVANCED OPERATION