Operation Manual

FT-252 OperaTing Manual 3

Antenna Jack
Connect the supplied rubber ex antenna (or an-
other antenna presenting a 50-Ohm impedance)
here.

DIAL
Knob
The main tuning Dial is used to set the operating
frequency. It is also used for menu selections and
other adjustments.

Speaker
The internal speaker is located here.

PTT
(Push To Talk) Switch
Press this switch to transmit, and release it (to receive) after your transmission is
completed.

LCD (Liquid Crystal Display)
The display shows the current operating conditions, as described on the next page.

Keypad
These 9 keys select many of most important operating features on the
FT-252
.

MIC
The internal microphone is
located here.

EXT DC
Jack
This coaxial DC jack allows
connection to an external DC
power source (5-10V DC).
The center pin of this jack is
the Positive (+) connection.
Do not allow the FT-
252 to become sub-
merged in water while the
rubber cap over the EXT DC
jack is removed.
Controls & Connectors
 






honbun_130313.indd 3 2013/03/13 19:47:33