Operation Manual

FT-270R OPERATING MANUAL82
I NSTALLATION OF THE FTD-7 DTMF P AGING U NIT
(
O PTION
)
1. Make sure that the transceiver is off. Remove the hard or soft case, if used.
2. Remove the battery pack.
3. Locate the connector for the FTD-7 under the caution seal in the battery compartment
on the back of the radio; just peel off the caution seal.
4. Align the connector on the FTD-7 with the transceiver's connector, and gently press
the unit into place.
5. Affix the new (supplied) caution seal, and replace the battery.
6. Installation is now complete.
When the optional FTD-7 DTMF Pager Unit is installed, a “PGU”
notation will be indicated on the display for 2 seconds, along with
the current DC supply voltage, when you turn the radio on.
Press the
Optional Unit
Affix the supplied
Caution Seal
Peel off the
Caution Seal
Connector