Operation Manual

45FT-2800M OPERATING MANUAL
MISCELLANEOUS SETTINGS
PROGRAMMING THE KEY ASSIGNMENTS
Default FT-2800M key functions have been assigned to the Microphone’s
[
P1
]
/
[
P2
]
/
[
P3
]
/
[
P4
]
buttons at the factory. These may be changed by the user, if you wish to assign quick
access to another function.
To change the assignments for the programmable keys:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select the Menu Item to be configured (“15 PRG P1,” “16 PRG P2,” “17 PRG P3,” or
“18 PRG P4”).
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to select the function you wish to
assign to the button you selected in the previous step. The available choices are:
DC IN: Indicates the current DC supply voltage.
DIMR: Sets the display brightness.
WX CH: Switches operation to the Weather channels bank.
INTKEY: Provides On/Off control for Internet access.
SKIP: Allows you to select channels to be skipped during scanning.
SQLOFF: Opens the Squelch to allow un-muted reception
S SRCH: Engages Smart Search operation.
TONE: Selects the CTCSS frequency
T SRCH: Engages the Tone Search Scanning feature.
T CALL: Activates 1750 Hz Tone Burst
RPTR: Selects the Repeater Shift direction manually.
3. Press the
[
MHz
(
SET
)]
key momentarily to save the new setting, then rotate the DIAL
knob to select another programmable button to modify, if desired, and repeat the above
steps.
4. Press and hold in the
[
MHz
(
SET
)]
key for one second to exit to normal operation.