Operation Manual

50 FT-2800M OPERATING MANUAL

MENU SELECTION DETAILS

00 ALPH

Function: Programming an Alpha/Numeric label for a memory. See page 31 for details.

01 APO

Function: Enables/disables the Automatic Power Off feature.

Available Values: 1H - 12 H, or OFF (1 Hour ~ 12 Hours)

Default: OFF

02 ARS

Function: Activates/deactivates the Automatic Repeater Shift feature.

Available Values: ON/OFF

Default: ON

03 BEEP

Function: Enables/disables the key beeper.

Available Values: ON/OFF

Default: ON

04 BELL

Function: Selects the CTCSS/DCS Bell Ringer repetitions.

Available Values: 1, 3, 5, 8, REPEAT, or OFF

Default: OFF

05 CK SFT

Function: Shifting of the CPU clock frequency.

Available Values: ON/OFF

Default: OFF

This function is only used to move a spurious response “birdie,” should it fall on a desired

frequency.

06 DC IN

Function: Indicates the DC Supply Voltage.

07 DIMR

Function: Setting of the front panel display’s illumination level.

Available Values: 1, 2, 3, or OFF

Default: 2

08 DTMF

Function: Enables/disables the DTMF Autodialer.

Available Values: ON/OFF

Default: OFF

“SET”

(

)

MODE