Operation Manual

51FT-2800M OPERATING MANUAL

09 DT DLY

Function: Setting of the DTMF Autodialer’s TX Delay Time.

Available Values: 50/250/450/750/1000 (ms)

Default: 450 (ms)

10 DT MEM

Function: Loading of the DTMF Autodialer Memories. See page 28 for details.

11 DT SPD

Function: Setting of the DTMF Autodialer Sending Speed.

Available Values: 50/100 (ms)

Default: 50 (ms)

12 EDG BP

Function: Enables/disable the Band-edge beeper while scanning.

Available Values: ON/OFF

Default: ON

13 INTNET

Function: Selects the Internet Connection mode.

Available Values: WIRES/LINK

Default: WIRES

14 LOCK

Function: Selects the Control Locking Lockout combination.

Available Values: KEY/DIAL/K+D/PTT/K+P/D+P/ALL/OFF

Default: OFF

KEY: Just the front panel keys are locked out

DIAL: Just the front panel DIAL knob is locked out

K+D: Both the keys and DIAL knob are locked out

PTT: The PTT switch is locked (TX not possible)

K+P: Both keys and PTT switch are locked out

D+P: Both DIAL knob and PTT switch are locked out

ALL: All of the above are locked out

OFF: The Lock feature is disabled

“SET”

(

)

MODE

MENU SELECTION DETAILS