Operation Manual

53FT-2800M OPERATING MANUAL

20 RF SQL

Function: Adjusts the RF Squelch threshold level.

Available Values: 1 - 10, or OFF

Default: OFF

21 RPTR

Function: Sets the Repeater Shift direction.

Available Values: –RPTR/+RPTR/SIMP

Default: SIMP

22 RVRT

Function: Enables/disables the “Priority Channel Revert” feature.

Available Values: ON/OFF

Default: OFF

23 SCAN

Function: Selects the Scan Resume mode.

Available Values: BUSY/HOLD/5 SEC

Default: BUSY

BUSY: The scanner will remain halted for as long as there is carrier present on the channel;

after the carrier drops at the end of the other station’s transmission, the scanner will

resume.

HOLD: The scanner will halt on a signal it encounters. It will not restart automatically; you

must manually re-initiate scanning if you wish to resume.

5 SEC: The scanner will halt for five seconds only, after which scanning will resume (whether

or not the other station is still transmission).

24 SHIFT

Function: Sets the magnitude of the Repeater Shift

Available Values: 00.00 - 99.95 (MHz) (only shifts of less than 4 MHz will work)

Default: 00.60 (MHz)

25 SKIP

Function: Selects the Memory Scan mode.

Available Values: SKIP/ONLY/OFF

Default: OFF

SKIP: The scanner will “skip” the flagged channels during scanning.

ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).

“SET”

(

)

MODE

MENU SELECTION DETAILS