Operation Manual

19FT-2900R OPERATING MANUAL
CHANNEL STEP SELECTION
Tuning steps are factory preset to default increments which are appropriate for the country
to which this radio is exported. You may have a reason to use a different step size, however,
and here is the procedure for changing the channel steps:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “
50 STEP50 STEP
50 STEP50 STEP
50 STEP.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
select the desired step size (
55
55
5/
1010
1010
10/
12.512.5
12.512.5
12.5/
1515
1515
15/
2020
2020
20/
2525
2525
25/
5050
5050
50/
100100
100100
100
kHz).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save your new setting and exit
to normal operation.
DISPLAY BRIGHTNESS
The FT-2900R display illumination has been specially engineered to provide high visibil-
ity with minimal disruption of your “night vision” while you are driving. The brightness of
the display is manually adjustable, using the following procedure:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “
16 DIMMER16 DIMMER
16 DIMMER16 DIMMER
16 DIMMER.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
select a comfortable brightness level (
LVL 0LVL 0
LVL 0LVL 0
LVL 0 -
LVL10LVL10
LVL10LVL10
LVL10).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to
save your new setting and exit to normal operation.
ADVANCED OPERATION