Operation Manual

33FT-2900R OPERATING MANUAL
8. If you wish to store another DTMF string, repeat steps 2 through 6 above.
9. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit
to normal operation.
To transmit the memorized telephone number, use the following procedure:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “
17 DT A17 DT A
17 DT A17 DT A
17 DT A/
MM
MM
M.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
set this Set Mode Item to “
AUTOAUTO
AUTOAUTO
AUTO.”
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to
save the new setting and exit to normal operation.
4. In the Autodialer mode, which you just engaged, first press the PTT switch, then press
the microphone’s numeric key (
[
0
]
through
[
9
]
) corresponding to the DTMF memory
string you wish to send. Once the string begins, you may release the PTT switch, as the
transmitter will be held “on the air” until the DTMF string is completed.
While the DTMF Autodialer is activated, the “ ” icon will
appear on the LCD.
To disable the Autodialer function mode, select “
MANUALMANUAL
MANUALMANUAL
MANUAL” in step 2 above.
The speed at which the DTMF digits are sent can be changed. Two speed levels are avail-
able: Low (10 digits per second) and High (20 digits per second: default). To toggle be-
tween Low and High speed, use the following procedure:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “
20 DT SPD20 DT SPD
20 DT SPD20 DT SPD
20 DT SPD.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
select the desired speed (“
5050
5050
50”: High speed or “
100100
100100
100”: Low
speed).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit
to normal operation.
You can also set a longer delay between the time your transmitter is keyed and the first
DTMF digit is sent. To set the delay time, use the following procedure:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “
18 DT DLY18 DT DLY
18 DT DLY18 DT DLY
18 DT DLY.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
select the desired speed (
5050
5050
50/
250250
250250
250/
450450
450450
450/
750750
750750
750/
10001000
10001000
1000 ms).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to
save the new setting and exit to normal operation.
DTMF OPERATION
DTMF AUTODIALER