Operation Manual

2 FT-2900R OPERATING MANUAL
General
Frequency Range: Tx 144 - 146 MHz or 144 - 148 MHz
Rx 144 - 148 MHz or 136 - 174 MHz
Channel Step: 5/10/12.5/15/20/25/50/100 kHz
Standard Repeater Shift: ±600 kHz
Frequency Stability: Better than ±10 ppm
[–4 °F to +140 °F (–20 °C to +60 °C)]
Modes of Emission: F2D/F3E
Antenna Impedance: 50 Ohms, unbalanced
Supply voltage: 13.8 V DC ±15 %, negative ground
Current Consumption (typical): Rx: less than 0.7 A, less than 0.3 A (squelched)
Tx: 15 A (75 W) /9 A (30 W) /5 A (10 W) /4 A (5 W)
Operating Temperature Range: –4° F to +140° F (–20° C to +60° C)
Case Size (WxHxD): 6.3” x 2” x 7.3” (160 x 50 x 185 mm) (w/o knobs)
Weight (Approx.): 4 .2 lb (1.9 kg)
Transmitter
Output Power: 75 W/30 W/10 W/5 W
Modulation Type: Variable Reactance
Maximum Deviation: ±5 kHz (Wide)
±2.5 kHz (Narrow)
Spurious Radiation: Better than –60 dB
Microphone Impedance: 2 k-Ohms
Receiver
Circuit Type: Double Conversion Superheterodyne
Ifs: 21.7 MHz & 450 kHz
Sensitivity (for 12dB SINAD): Better than 0.4 µV
Selectivity (–6/–60dB): 12 kHz/28 kHz (Wide)
9 kHz/22 kHz (Narrow)
IF Rejection: Better than 70 dB
Image Rejection: Better than 70 dB
Maximum AF Output: 3 W into 4 Ohms @10 % THD
Specifications subject to change without notice or obligation. Specifications guaranteed
only within Amateur band.
Frequency ranges will vary according to transceiver version; check with your dealer.
SPECIFICATIONS