Operation Manual

65FT-2900R OPERATING MANUAL
MISCELLANEOUS SETTINGS
PROGRAMMING THE KEY ASSIGNMENTS
Default FT-2900R key functions have been assigned to the Microphone’s
[
P1
]
/
[
P2
]
/
[
P3
]
/
[
P4
]
buttons at the factory. These may be changed by the user, if you wish to assign quick
access to another function.
To change the assignments for the programmable keys:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select the Menu Item to be config-
ured (“
36 PRG P136 PRG P1
36 PRG P136 PRG P1
36 PRG P1,” “
37 PRG P237 PRG P2
37 PRG P237 PRG P2
37 PRG P2,” “
38 PRG P338 PRG P3
38 PRG P338 PRG P3
38 PRG P3,” or “
3939
3939
39
PRG P4PRG P4
PRG P4PRG P4
PRG P4”).
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to select the function you wish to
assign to the button you selected in the previous step. The
available choices are vary slightly among the four keys you
may program, and they include:
ARTSARTS
ARTSARTS
ARTS: Engages the ARTS™ operation.
SQLOFFSQLOFF
SQLOFFSQLOFF
SQLOFF: Opens the Squelch to allow un-muted reception.
WX CHWX CH
WX CHWX CH
WX CH: Switches operation to the Weather channels bank.
S SRCHS SRCH
S SRCHS SRCH
S SRCH: Engages the Smart Search operation.
C SRCHC SRCH
C SRCHC SRCH
C SRCH: Engages the Tone Search Scanning feature.
SCANSCAN
SCANSCAN
SCAN: Engages the Scan operation
T CALLT CALL
T CALLT CALL
T CALL: Activates 1750 Hz Tone Burst
or one of the Set Menu items.
3. Press the
[
MHz
(
SET
)]
key momentarily to save the new setting, then rotate the DIAL
knob to select another programmable button to modify, if desired, and repeat the above
steps.
4. Press and hold in the
[
MHz
(
SET
)]
key for one second to exit to normal operation.
You may assign Set Mode items to the Microphone’s
[
P1
]
/
[
P2
]
/
[
P3
]
/
[
P4
]
buttons, as well,
to do this:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item which you wish to assign to the key
as a Menu short-cut.
3. Press and hold in the Microphone’s
[
P1
]
,
[
P2
]
,
[
P3
]
, or
[
P4
]
button for one second to
assign the Set Mode Item to that button.
4. Now you can recall this preferred Set Mode Item by simply pressing the Microphone’s
button momentarily.
Button
[
P1
]
[
P2
]
[
P3
]
[
P4
]
Default
SQLOFF
S SRCH
C SRCH
USA Version: WX CH
EXP Version: T.CALL