Operation Manual

72 FT-2900R OPERATING MANUAL
“SET”
(
MENU
)
M
ODE
REPEATER SETTING
Activates/Deactivates the Automatic Repeater Shift
feature.
Sets the Repeater Shift direction.
Sets the magnitude of the Repeater Shift.
CTCSS/DCS/EPCS SETTING
Selects the CTCSS/DCS/EPCS Bell Ringer repeti-
tions.
Setting of the DCS code.
Enables/Disables “Inverted” DCS code decoding.
Enables/Disables the Enhanced CTCSS Paging &
Code Squelch function.
Enables/Disables the Answer Back function of the
Enhanced CTCSS Paging & Code Squelch function.
Setting the Receiver Pager Code for the Enhanced
CTCSS Paging & Code Squelch function.
Setting the Transmitting Pager Code for the Enhanced
CTCSS Paging & Code Squelch function.
Enables/Disables the split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency.
Enables/Disables the receiver audio output during the
Tone Search Scanner is activated.
Selects the Tone Search Scanner speed.
ARTS™ SETTING
Selects the Beep option during ARTS™ operation.
Selects the Polling Interval during ARTS™ operation.
Enables/Disables the CW identifier during ARTS™
Operation.
MEMORY SETTING
Select the Memory Bank for the Memory Bank Link
Scan.
Programming an Alpha/Numeric label for a Memory
Bank.
Selects the method of selection of channels for
Memory Storage.
Programming an Alpha/Numeric label for a Memory
Channel.
Enables/Disable the Band-edge beeper while scan-
ning.
Selects the Memory Scan mode.
SCAN SETTING
Selects the Scan Resume mode.
Selects the Memory Scan mode.
Select the VFO Scanner Width.
DTMF SETTING
Enables/Disables the DTMF Autodialer feature.
Setting of the DTMF Autodialer’s TX Delay Time.
Loading of the DTMF Autodialer Memories.
Setting of the DTMF Autodialer Sending Speed.
AVAILABLE VALUES
(
DEFAULT
)
ON / OFF
–RPT / +RPT / SIMP
0.00-99.95
(
MHz
) (
0.60MHz
)
AVAILABLE VALUES
(
DEFAULT
)
1 / 3 / 5 / 8 / CNTNUE / OFF
104 standard DCS codes
(
023
)
ENABLE / DISABL
ON / OFF
ON / OFF
---
(
05
_
47
)
---
(
05
_
47
)
ON / OFF
TONE / TSQL / DCS / RV TN /
OFF
50 standard CTCSS tones
(
100 Hz
)
ON / OFF
FAST / SLOW
AVAILABLE VALUES
(
DEFAULT
)
IN RNG / ALWAYS / OFF
25SEC / 15SEC
ON / OFF
AVAILABLE VALUES
(
DEFAULT
)
---
---
NEXT / LOWER
---
ON / OFF
TAG1 / TAG2 / ALL CH
AVAILABLE VALUES
(
DEFAULT
)
BUSY / HOLD / 3SEC / 5SEC /
10SEC
SKIP /ONLY / OFF
±1MHz / ±2MHz / ±5MHz / ALL
AVAILABLE VALUES
(
DEFAULT
)
MANUAL / AUTO
50 / 250 / 450 / 750 / 1000 (ms)
---
50 / 100 (ms)
SET MODE ITEM
4 ARS
43 RPT
46 SHIFT
SET MODE ITEM
7 BELL
14 DCS CD
15 DCS RV
32PAGER
33 PAG.ABK
34 PAG.CDR
35 PAG.CDT
48 SPLIT
49 SQ TYP
52 TN FRQ
54 TS MUT
55 TS SPD
SET MODE ITEM
2 AR BEP
3 AR INT
11 CW ID
SET MODE ITEM
8 BNK.LNK
9 BNK NM
29 MW MD
30 NM SET
21 EDG.BEP
28 MEM.SCN
SET MODE ITEM
41 RESUME
47 SKIP
56 VFO.SCN
SET MODE ITEM
17 DT A/M
18 DT DLY
19 DT SET
20 DT SPD