Operation Manual

Page 78 FT-450 OPERATION MANUAL
EXT MNU (EXTENSION MENU)
Function: Enables / Disables the extended Menu
Mode
Available Values: ON / OFF
Default: OFF
OFF: The menu will only display the 16 most often
used items.
ON: All 62 menu mode items will be displayed.
A&FDIAL (AM&FM DIAL)
Function: Enables or disables the
[
MAIN DIAL
]
knob
in the AMand FM modes.
Available Values: ENABLE / DISABLE
Default: DISABLE
ENABLE: The frequency can be set with the
[
MAIN
DIAL
]
knob even in the AM/FM mode.
DISABLE: The
[
MAIN DIAL
]
knob does not change
the frequency in the AM / FM mode.
APO (APO TIME)
Function: OFF / 1~12 (h)
Available Values: ON / OFF
Default: OFF
Selects the Auto Power Off time (time before power
goes off).
BCN TIM (BEACON TIME)
Function: Selects the interval time (between mes-
sage and message)
Available Values: OFF/1~255 (sec)
Default: OFF
BCN TXT (BEACON TEXT)
Function: Stores the message for the Beacon. Up
to 118 characters may be stored.
Please refer to page 50 for storage procedure.
BEEPTON (BEEP TONE)
Function: Selects the beep frequency.
Available Values: 440 / 880 / 1760 (Hz)
Default: 880 (Hz)
BEEPVOL
Function: Selects the beep volume level.
Available Values: FIX0 ~ FIX100 or
LNK-50 ~ LNK 0 ~ LNK+50
Default: FIX10 or LNK-8
CAT RTS
Function: Enables / Disables the RTS port of the
CAT jack.
Available Values: DISABLE/ENABLE
Default: ENABLE
CAT TOT (CAT TIME OUT TIME)
Function: Sets the Time-Out Timer countdown time
for a CAT command input.
Available Values: 10 / 100 /1000 / 3000 (mS)
Default: 10
The Time-Out Timer shuts off the CAT data input af-
ter a continuous transmission of the programmed
time.
CATRATE
Function: Sets the transceiver circuitry for the CAT
baud rate to be used.
Available Values: 4800/9600/38400 (bps)/DATA
Default: 4800
The CAT baud rate is set for the transceiver.
Setting “CATRATE” to “DATA” will enable RTTY op-
eration from the CAT jack. The interconnection for
RTTY operation is shown below.
MENU MODE
P
i
n
3
:
S
E
R
I
A
L
I
N
(
F
S
K
I
N
)
E
X
T
S
P
(
F
S
K
O
U
T
)
P
i
n
7
:
R
T
S
(
D
A
T
A
P
T
T
)
Requires the RTTY Software
(Not Supplied)
L
I
N
E
I
N
J
a
c
k
R
S
-
2
3
2
S
J
a
c
k
P
i
n
5
:
G
N
D
INPUT
DC 13.8V
22A
ANT
GND
EXT
SPKR
CATLINEARTUNERDATA