Operation Manual

FT-60R/E OPERATING MANUAL74
Set Mode Item 26
[
M/T-CL
]
Function: Selects the MONI switch (just below the PTT switch) function.
Available Values: MONI/T-CALL
Default: Depends on the transceiver version
MONI: Pressing the MONI switch causes the Noise/Tone Squelch to be over-ridden,
allowing you to listen for weak (or non-encoded) signals.
T-CALL: Pressing the MONI switch activates a 1750-Hz burst tone, used for repeater
access in many countries (especially in Europe).
Set Mode Item 27
[
NAME
]
Function: Toggles the display indication between “frequency” and the channel’s “Alpha/
Numeric Tag.”
Available Values: FREQ/ALPHA
Default: FREQ
Set Mode Item 28
[
NM WRT
]
Function: Stores Alpha-Numeric “Tags” for the Memory channels.
See page 30 for details.
Set Mode Item 29
[
PAGER
]
Function: Enables/disables the Enhanced CTCSS Paging & Code Squelch function.
Available Values: PAG.OFF/PAG. ON
Default: PAG.OFF
Set Mode Item 30
[
PAG.ABK
]
Function: Enables/disables the Answer Back function of the Enhanced CTCSS Paging &
Code Squelch.
Available Values: ABK.OFF/ABK. ON
Default: ABK.OFF
Set Mode Item 31
[
PAG.CDR
]
Function: Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page 44 for details.
Set Mode Item 32
[
PAG.CDT
]
Function: Setting the Transmitting Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page 44 for details.
Set Mode Item 33
[
PSWD
]
Function: Enables/disables the Password feature.
Available Values: PWD.OFF/PWD. ON
Default: PWD.OFF
SET
(
MENU
)
M
ODE