Operation Manual

FT-60R/E OPERA TING MANUAL 75
Set Mode Item 34
[
PSWD W
]
Function: Stores the password.
Available entries are 0-9, A, B, C, D, E (substitute for “”), and F (substitute for “#”)
Set Mode Item 35
[
RESUME
]
Function: Selects the Scan Resume mode.
Available Values: BUSY/HOLD/TIME
Default: BUSY
BUSY: The scanner will hold until the signal disappears, then will resume when the car-
rier drops.
HOLD: The scanner will stop when a signal is received, and will not restart.
TIME: The scanner will hold for the five seconds, then resume whether or not the other
station is still transmitting.
Set Mode Item 36
[
REV/HM
]
Function: Selects the function of the
[
HM/RV
]
key.
Available Values: < REV > / < HOME >
Default: < REV >
< REV > : Pressing the
[
HM/RV
]
key reverses the transmit and receive frequencies during
repeater operation.
< HOME > : Pressing the
[
HM/RV
]
key instantly recalls a favorite “Home” channel.
Set Mode Item 37
[
RF SQL
]
Function: Adjusts the RF Squelch threshold level.
Available Values: S-1/S-2/S-3/S-4/S-5/S-6/S-8/S-FULL/OFF
Default: OFF
Set Mode Item 38
[
RPT.MOD
]
Function: Sets the Repeater Shift Direction.
Available Values: RPT.OFF/RPT. -/RPT. +
Default: Depends on the transceiver version, as well as the setting of Set Mode Item 4:
ARS.
Set Mode Item 39
[
PRI.RVT
]
Function: Enables/disables the Priority Revert feature.
Available Values: RVT.OFF/RVT. ON
Default: RVT.OFF
See page 42 for details.
Set Mode Item 40
[
RX MOD
]
Function: Selects the receiving mode.
Available Values: AUTO/FM/AM
Default: AUTO (Mode automatically changes according to operating frequency)
SET
(
MENU
)
M
ODE