Extra Information

11
FT-70DR/DE Advance Manual
Calling a Specific Station
The “pager code” may be set to call to specific stations.
1. See “Activating the New Pager Function” to initiate the
new pager function.
2. Press and hold the
[
F
]
key, rotate the DIAL knob to se-
lect the Set Mode
[
39 PAG.CDT
]
.
3. Press the
[
F
]
key.
4. Rotate the DIAL knob to select the first element of the
code from the 01 to 50.
5. Press the
[
BAND
]
key to move the icon to the second
element of the code.
6. Rotate the DIAL knob to select the second element of
the code from the 01 to 50.
The first and second element may not be set to the
same code.
7. Press the PTT switch to save the setting and return to
normal operation.
8. Press the PTT switch to transmit a call to the specific
station.
Receiving “pager code” calls from a Remote Station (Standby Operation)
When the Pager function is activated, and a call is received with a corresponding Code,
the “
” icon blinks and the audio is heard.
Furthermore, when the Bell function (
12) is activated, the bell rings and the “ ”
icon blinks while calling from the other station.
Using the Pager Answer Back
If the Answer Back feature is ON, when called by another station with a corresponding
pager code, the transceiver is automatically placed in the transmit mode (for about 2.5
seconds) to notify the other station that you are ready to communicate.
1. Press and hold the
[
F
]
key, rotate the DIAL knob to se-
lect the Set Mode
[
37 PAG.ABK
]
.
2. Press the
[
F
]
key.
3. Rotate the DIAL knob to select the “ON”.
4. Press the PTT switch to save the setting and return to
normal operation.