Extra Information

13
FT-70DR/DE Advance Manual
Convenient Functions
Split Memory
Two different frequencies, one for receive and another for transmit, may be registered to
a memory channel.
1. Register the receive frequency to a memory channel first.
See “Registering to Memory Channels” (Operating Manual).
2. Set the transceiver to the desired transmit frequency.
3. Press and hold the
[
V/M
]
key.
4. Rotate the DIAL knob to select the channel number that
the receive frequency was registered to on step1.
5. While pressing and holding the PTT switch, press the
[
V/M
]
key.
• The beep sounds and the split memory is saved.
• While recalling the split memory,”
” and “ ” is dis-
played on the LCD.
Registering the receive frequency
Registering the transmit frequency
Split Memory
Recalling the split memory
While operating the split memory, press the
[
F
]
key, then press the
[
HM/RV
]
key to reverse the
transmit and receive frequencies temporarily When reversing the frequencies, “ ” and “ ” blink
Using Memory Tag
Memory name tags (up to 6 characters) may be assigned or changed on the memory
channels and home channels.
1. Recall the memory channel or home channel to assign the name tag.
2. Press and hold the
[
F
]
key, rotate the DIAL knob to select the Set Mode
[
33 MEM.NAM
]
.
3. Press the
[
F
]
key.
The character input screen is displayed.
4. Use the numeric keypad or DIAL knob to input the characters.
• Inputting characters
Example quickly Pressing the
[
2
]
key, each time switches the following characters:
 A→B→C→2→A→

Example Rotating the DIAL switches the following characters.


A - Z

(symbol)

0 - 9

(symbol)

A - Z


• Moving the cursor, deleting the input character
[
BAND
]
key: Moves the cursor to the right
[
MODE
]
key: Moves the cursor to the left
Pressing and holding the
[
GM
]
key: Erases all characters after the cursor
5. Press the PTT switch to save the setting and return to normal operation.
The memory tag is registered to the memory channel, and the Set Mode exits.