Extra Information

15
FT-70DR/DE Advance Manual
Using Memory Banks
The transceiver allows using up to 24 memory banks to be recalled with the sorted the
memory channels. One memory channel may also be registered in two or more memory
banks according to the intended use.
Example of registering memory channels to the memory banks:
~
~
Memory channels Memory banks
b1 (1 - 100) 144 MHz Amateur Band Channels
b2 (1 - 100) 430 MHz Amateur Band Channels
b3 (1 - 100)
b4 (1 - 100) All Amateur Band Channels
b5 (1 - 100)
b6 (1 - 100) Air Band Channels
b7 (1 - 100)
b8 (1 - 100)
b9 (1 - 100)
b10 (1 - 100)
b24 (1 - 100)
1 145.000 MHz
2 145.500 MHz
3 120.400 MHz
4 -
5 439.700 MHz
6 432.800 MHz
7 108.700 MHz
8 -
9 -
10 -
900 -
Registering to Memory Banks
1. Press the
[
V/M
]
key to enter the memory mode.
2. Rotate the DIAL knob to recall the memory channel to
register in the memory bank,
Memory Channel Number
3. Press and hold the
[
V/M
]
key.
“
” blinks.
4. Rotate the DIAL to select the memory bank (b1 to b24)
to register the memory channel.
• The memory bank channels are displayed between the memory channel 1 (1CH),
and PMS memory channel U50.
5. Press the
[
V/M
]
key.
The memory channel is registered in the selected memory bank and the transceiver
operation returns to the memory mode.
Open the Memory Bank display
1. Press the
[
V/M
]
key to switch to the memory mode.
2. Pressing the
[
BAND
]
key switches between the normal
memory channel display and the memory bank display.
BANK
££
(1 - 24) : The memory bank display
MEMORY : The memory channel display
The display is automatically switched to the selected dis-
play after one second.
Memory Bank Number
If no memory channel is registered, setting the following operation sounds the beep and “NO
BNK” will be displayed.