Extra Information

16
FT-70DR/DE Advance Manual
Open Memory Bank Channels
1. After pressing the
[
F
]
key, press the
[
BAND
]
key.
2. Rotate the DIAL knob to select the memory bank (b1 to
b24) to be recalled.
If no memory channel is registered, the memory bank may
not be selected.
3. Press the
[
BAND
]
key.
The selected memory bank is activated.
Memory Bank Number
Canceling a Memory Channel Registered in Memory a Bank
1. Recall the memory bank to cancel registering.
2. Rotate the DIAL knob to select the memory channel to cancel registering to the
memory channel.
3. Press and hold the
[
V/M
]
key.
4. Press the
[
AMS
]
key.
Assigning a Name to a Memory Bank
1. Press and hold the
[
F
]
key to enter the Set Mode.
2. Rotate the DIAL knob to select the Set Mode
[
9 BNK.NAM
]
.
3. Press the
[
F
]
key.
4. Rotate the DIAL knob to select the memory bank to assign the name.
5. Press the
[
V/M
]
key.
The character input screen is displayed.
The default memory bank names are set from “BANK 1” to “BANK 24. Each name may be
changed.
6. Use the numeric keys or DIAL knob, to input the name characters.
• Inputting characters:
Example, quickly pressing the
[
2
]
key each time switches the following characters.
 A→B→C→2→A→

Example, Rotating the DIAL switches the following characters.


A-Z

(symbol)

0-9

(symbol)

A-Z


• Moving the cursor & deleting input characters:
[
BAND
]
key: Moves the cursor to the right
[
MODE
]
key: Moves the cursor to the left
Pressing and holding the
[
GM
]
key: Erases all characters after the cursor
7. Press the PTT switch to save the setting and return to normal operation.
The memory bank name is set and the transceiver exits from Set mode.