Extra Information

21
FT-70DR/DE Advance Manual
z
The default setting is “HOLD”.
z
In the Set Mode
[
21 DW INT
]
(see 32), the interval time at which the priority channel is
monitored may be set from 0.1 SEC to 10.0 SEC. (The default setting is “5.0 SEC”.)
z
When Set Mode
[
23 DW RVT
]
(see 32) is set to ON, press the PTT switch to transmit,
without waiting for activity to appear on the priority channel. After transmitting, the transceiver
receives the priority channel and Dual Receive resumes after 5 seconds.
DTMF Operation
DTMF (Dual Tone Multi Frequencies) are the tone signals sent to make telephone calls,
or control repeaters and network links. Up to 10 registers of 16-digit DTMF tone codes
can be stored as telephone numbers to make calls through the public telephone network
using a phone patch or connect through the WIRES-X analog node station.
Setting the DTMF Memory
1. Press and hold the
[
F
]
key, then rotate the DIAL knob
to select the Set Mode
[
19 DT SET
]
.
2. Press the
[
F
]
key.
The DTMF memory channel number blinks.
3. Rotate the DIAL knob to select the DTMF memory
channel number to register.
4. Press the
[
V/M
]
key.
The DTMF memory channel input screen is displayed.
5. Use the numeric keypad or DIAL knob to input the
DTMF code maximum of 16 digits.
• Using the numeric key:
The DTMF codes from 0 to 9 may be input.
Rotate the DIAL knob to input A to D,
Û
or #.
• Using the DIAL knob:
Rotate the DIAL knob to set the DTMF code.


0 to 9

A to F

-


“
Û
” is displayed “E”, “#” is displayed “F”
• Moving the cursor, deleting input characters:
[
BAND
]
key: Moves the cursor to the right
[
MODE
]
key: Moves the cursor to the left
Pressing and holding the
[
GM
]
key:
Erases all characters after the cursor
Cursor position
(Number of digits)
6. Press the PTT switch to save the setting and return to
normal operation.
• Press the
[
F
]
key to save the DTMF memory and re-
turn to Set Mode screen.