Extra Information

22
FT-70DR/DE Advance Manual
Transmitting the Registered DTMF Code
1. Press the
[
F
]
key, then press the
[
3
]
(DTMF) key.
1. The DTMF function setting screen is displayed.
2. Rotate the DIAL knob to select the “AUTO”.
The DTMF icon blinks on the display.
AUTO:
The registered DTMF code is automatically
transmitted.
MANUAL: The DTMF code may be transmitted man-
ually by pressing each numeric key.
3. Press the PTT switch to save the setting and return to
normal operation.
The setting is completed.
DTMF icon
4. While pressing and holding the PTT switch, press a nu-
meric
[
0
]
to
[
9
]
key.
The DTMF code registered in the DTMF memory chan-
nel is automatically transmitted.
• Even after releasing the PTT switch, the transmission
continues until the DTMF code is completed. The
transceiver is automatically returned to receive mode.
Manually Transmitting the DTMF Code
1. Set
[
3
]
(DTMF) to “MANUAL” referring to the above
“Transmitting the Registered DTMF Code”.
2. While pressing and holding the PTT switch to transmit,
press each corresponding key to send the DTMF code:
[
0
]
to
[
9
]
key: 0 to 9
[
F
]
key: A
[
MODE
]
key: B
[
HM/RV
]
key: C
[
AMS
]
key: D
[
BAND
]
key:
Û
[
V/M
]
key: #
The transmission may continue for two seconds after
releasing the PTT switch.