Extra Information

25
FT-70DR/DE Advance Manual
Tables of Set Mode Operations
No.
Set Mode
Item
Description
Selectable options
(Options in bold are the default
settings)
1 ANT.ATT Switch the attenuator between ON/OFF. OFF / ON 28
2 APO
Set the length of time until the transceiv-
er turns off automatically.
OFF / 0.5 Hours to 12 Hours 28
3 BCLO
Turns the busy channel lockout function
ON/OFF .
OFF / ON 28
4 BEEP Sets the beep sound function. OFF / KEY+SC / KEY 28
5 BEP.LVL Beep volume setting
LEVEL1 - LEVEL4 - LEVEL7 28
6 BEP.EDG
Sets the beep sound ON or OFF when a
band edge is encountered.
OFF / ON 29
7 BEP.STB
Sets the beep sound ON or OFF when
the other station completes transmission
in the Digital Mode.
OFF / ON 29
8 BELL Set the bell function settings.
OFF / 1 T - 20 T / CONT (Contin-
uous ringing)
12
9 BNK.NAM Assign a name to each memory bank. (up to 6 characters) 16
10 BSY.LED
Turn the MODE/STATUS Indicator ON or
OFF while receiving signals.
LED.OFF / LED.ON 30
11 CLK.SFT Set the clock shift function. A / B 30
12 DC VLT Display the voltage. (Voltage) 30
13 DCS.INV
Select a combination of DCS inversion
codes in terms of communication direc-
tion.
RXN.TXN / RXR.TXN / RXB.TXN /
RXN.TXR / RXR.TXR / RXB.TXR
30
14 DIMMER
Set the brightness level of the LCD back-
light and numeric keypad light.
LEVEL1 - LEVEL6 31
15 DIG.POP Set the POP UP display time.
OFF / 2 SEC – 10 SEC
- 60 SEC / CONT
31
16 DIG VW Turn the VW mode selection ON or OFF. OFF / ON 31
17 DP-ID DP-ID list (Display/Register/Clear) (Registered DP-ID) 4
18 DT DLY
Set the DTMF code transmission delay
time.
50MS / 250MS / 450MS / 750MS
/ 1000MS
31
19 DT SET
Select and edit the DTMF auto dialer
memory channel.
CH0 / CH1 - CH9 21
20 DT SPD Set the DTMF code transmission speed. 50 MS / 100 MS 32
21 DW INT
Set the priority memory channel monitor-
ing interval during Dual Receive.
0.1 S – 5.0 S – 10.0 S 32
22 DW RSM
Configure the scan stop mode settings
for Dual Receive.
2.0 S – 10.0 S / BUSY / HOLD 20
23 DW RVT
Turn the “Priority Channel Revert” fea-
ture ON or OFF during Dual Receive.
OFF / ON 32
24 GM RNG
Select the beep option while receiving
digital GM information.
OFF / IN RNG /ALWAYS 33
25 GM INT
Set the transmission interval of digital
GM information.
OFF / NORMAL / LONG 33