Extra Information

28
FT-70DR/DE Advance Manual
1 ANT.ATT
Enables/Disables the Receiver Front-end Attenuator.
Set the attenuator (ATT) function. If setting ON, the receiver sensitivity may be re-
duced to about 10 dB.
OFF Disable the attenuator (ATT) function OFF.
ON Enable the attenuator (ATT) function ON.
2 APO
The Setting of the APO (Auto Power Off)
Set the length of time until the transceiver turns off automatically.
OFF Automatic Power OFF (APO)
0.5 H –
12 H (Hours)
“
” icon appears on the LCD; the transceiver is turned OFF
automatically when no operation is performed for a specified
period of time.
Beep sounds about 60 seconds before turn OFF.
3 BCLO
Enables/Disables the Busy Channel Lock-Out feature.
Preventing transmissions when the receive channel is busy.
OFF Permits starting a transmission while receiving a signal.
ON Disables transmissions while receiving a signal.
4 BEEP
Setting of the beep sound when operating keys or stopping scanning.
Set whether or not a beep sound is emitted to confirm when keys are operated, when
scanning reaches the end of a frequency band.
OFF The beep does not sound.
KEY+SC
Emits the beep sound when a key is operated or scanning
stops.
KEY Emits the beep sound when a key is pressed.
5 BEP.LVL
Beep volume setting
Changing the Beep Volume
LEVEL1
– LEVEL4
– LEVEL7
Rotate the DIAL knob to adjust the beep volume.
Rotating the DIAL knob each time sounds beep for checking the volume.