Extra Information

29
FT-70DR/DE Advance Manual
6 BEP.EDG
The Confirmation sound is emitted when a Band Edge or Memory Channel 1
is encountered.
Set whether or not a beep sound is emitted to confirm when a Band Edge or Memory
Channel 1 is encountered.
OFF
No confirmation sound is emitted when a Band Edge or Mem-
ory Channel 1 is encountered.
ON
Emits the confirmation sound when a Band Edge or Memory
Channel 1 is encountered.
7 BEP.STB
The setting of the Standby Beep in the digital C4FM mode.
Set whether or not to emit the standby beep sound when the other station completes
transmission in the digital C4FM mode.
OFF Does not emit the standby beep sound.
ON Emits the standby beep sound.
8 BELL
Setting of the number of times the bell rings
Set the Bell sound to alert you of a call from another station containing a correspond-
ing tone, DCS or pager code.
OFF The beeper does not sound.
1 T – 20 T
The number of times the bell rings may be set from among 1
to 20 times.
CONT The bell continues to sound until performing key
For more details, see “Notification of a Call from a Remote Station by the Bell Func-
tion” (
12).
9 BNK.NAM
Assigning a name to memory bank.
A name can be assigned to a memory bank using up to 16 characters.
For more details, see “Assigning Name to Memory Bank” (
16).