Extra Information

30
FT-70DR/DE Advance Manual
10 BSY.LED
Turn the MODE/STATUS Indicator ON or OFF while receiving signals.
Set whether or not the MODE/STATUS Indicator lights when receiving signals.
LED.ON The MODE/STATUS Indicator lights during receiving signals.
LED.OFF
The MODE/STATUS Indicator does not light during receiving
signals.
If setting “LED.OFF”, the transmission condition and the In/Out display of the GM
function is displayed.
11 CLK.SFT
Setting of the CPU clock shift function.
Set the CPU Clock Shift function may be activated to eliminate an internally generat-
ed spurious high frequency signal. Select “A” for normal use.
A
Automatically switches the Clock Shift function between ON &
OFF.
B Activates the Clock Shift function constantly.
12 DC VLT
The battery voltage display
Displays battery DC voltage.
Press the PTT switch to check the battery voltage in the transmission state.
In this setting, press and hold the
[
F
]
key, to return to normal operation.
13 DCS.INV
Setting a combination of DCS inversion codes in terms of communication di-
rection.
The DCS code phase combination for transmit/receive may be set to the homeomor-
phic or the inverted phase.
Values Receive DCS Code Transmit DCS Code
RXN.TXN Homeomorphic Homeomorphic
RXR.TXN Inverted Phase Homeomorphic
RXB.TXN
Both Phase (Homeomorphic/
Inverted Phase)
Homeomorphic
RXN.TXR Homeomorphic Inverted Phase
RXR.TXR Inverted Phase Inverted Phase
RXB.TXR
Both Phase (Homeomorphic/
Inverted Phase)
Inverted Phase
Setting the receive DCS code to “Both Phase”, the DCS codes of the Homeomorphic
and the Inverted phases are regarded as the same code.
For details on the DCS code, see “Digital Code Squelch (DCS) feature” (
9).