Extra Information

32
FT-70DR/DE Advance Manual
20 DT SPD
Set the DTMF code transmission speed.
Set the DTMF code transmission speed when setting “AUTO”.
50MS /
100MS(
msec)
The DTMF code transmission speed setting
21 DW INT
The receive monitoring interval setting of the Priority Memory Channel during
Dual Receive (DW)
Set the interval of time for periodically checking the Priority Channels during Dual Re-
ceive (DW)
0.1 S –
5.0 S –
10.0 S (SEC)
When the Dual Receive function is active, the interval time at
which the priority channel is monitored can be set.
22 DW RSM
Set the searching stop operation during the Dual Receive temporary stop
Chose the resume operation for Dual Receive when a signal is received on the Priori-
ty Memory Channel.
2.0 S – 10.0 S
The signal is received for the specified period of time, then the
Dual Receive resumes even though the received signal con-
tinues.
BUSY
The Priority Memory Channel signal is received until the signal
fades out. Two seconds after the signal fades out, scanning
resumes.
HOLD
Dual receive stops and reception on the Priority Memory
Channel continues. (The Dual Receive does not resume.)
23 DW RVT
Set the Priority Memory Channel transmit operation.
Determines the operation of the PTT switch when pressed during the Dual Receive
OFF
When a signal is received on Priority Memory Channel, duel
receive pauses, press the PTT switch to deactivate the Dual
Receive operation and transmit on the Priority Memory Chan-
nel. (The Dual Receive does not resume.)
ON
Press the PTT switch to transmit on the Priority Memory Chan-
nel. Release the PTT switch to receive the Priority Memory
Channel for about five seconds, then Dual Receive operation
continues.