Extra Information

36
FT-70DR/DE Advance Manual
36 OPN.MSG
Create an opening message
Set the message displayed for three seconds.
OFF Does not display.
MSG The message input by the following operation displays.
DC Displays battery DC voltage.
Message input method
1. Press the
[
F
]
key in this setting item, press the
[
V/M
]
key while selecting the setting
values.
2. Using the DIAL knob or the numeric keys, input the message using up to 6 charac-
ters.
• Inputting characters
Example: Pressing the
[
2
]
key each time switches the following characters.
 A→B→C→2→A→

Example: Rotating the DIAL switches the following characters.


A-Z

(symbol)

0-9

(symbol)

A-Z


• Moving the cursor, and deleting input characters
[
BAND
]
key: Moves the cursor to the right
[
MODE
]
key: Moves the cursor to the left
Pressing and holding the
[
GM
]
key:
Erases all characters after the cursor
3. Press the
[
V/M
]
key to save the setting and return to normal operation.
37 PAG.ABK
Enables/disables the Answer Back function of the Enhanced CTCSS Paging &
Code Squelch.
When called by another station corresponding to the pager code, the transceiver is-
automatically placed in the transmit mode (for about 2.5 seconds) to notified the other
station that you are ready to communicate.
OFF Does not transmit automatically.
ON Transmits automatically.
For more details, see “Using the Pager Answer back” (
11).
38 PAG.CDR
Specify the receive personal Enhanced CTCSS Paging code.
Set the pager code for receive to be called by other stations.
01 – 05 – 50,
01 – 47 – 50
Set the receive “pager code” to be called by other stations.
For more details, see “Setting the Code for Your Station” (
10).