Extra Information

38
FT-70DR/DE Advance Manual
44 RF SQL
Adjusts the RF Squelch threshold level.
This feature allows setting the squelch to open only for signals exceeding the previ-
ously selected S-meter level.
OFF Normal squelch operation. RF Squelch is OFF.
S1 – S9
Only signals exceeding the set S-meter level will open the
squelch.
z
When setting the RF squelch, the S meter number corresponding to the set signal strength
blinks.
z
When receiving signals with less than the set signal strength (S meter value), the left side
of the MODE/STATUS Indicator blinks blue, but no audio is heard.
RF squelch is available on the FM mode or the AM mode.
45 RPT.ARS
Set the ARS (Automatic Repeater Shift).
Enable or disable the automatic Repeater Shift operation ARS (Repeater operation is
initiated by tuning to the repeater frequency).
OFF Disables the ARS function.
ON Set the repeater shift offset frequency.
46 RPT.FRQ
Set the Repeater Shift offset frequency
Set the repeater shift offset frequency.
0.00M – 150.00M Repeater shift offset frequency (0.00MHz - 150.00MHz).
47 RX MOD
Set the band receiving mode.
Each band receive mode may be set.
AUTO
The receive mode (FM mode or AM mode) is automatically se-
lected according to the frequency band in use.
FM The selected frequency band is set to FM mode.
AM The selected frequency band is set to AM mode.