Extra Information

41
FT-70DR/DE Advance Manual
55 TEMP
Indicates the current temperature inside the transceiver.
Displays the internal temperature sensor “°F” or “°C”.
Press the
[
V/M
]
key to toggle the measurement units between “°F” or “°C”.
In this setting, press and hold the
[
F
]
key to return to normal operation.
56 TOT
Set the timeout timer.
Set the transceiver to automatically return to receive mode after transmitting continu-
ously for a certain period of time. The TOT function limits inadvertent transmission of
unnecessary signals, and unwanted battery power consumption (time-out timer func-
tion).
OFF The TOT time is deactivated
0.5M – 10.0M
(Minutes)
Set the transceiver to automatically return to receive mode af-
ter transmitting continuously for the set period of time.
The beep sounds at about 10 seconds before returning to return to receive mode au-
tomatically.
57 TS MUT
Turn the muting function ON/OFF during tone search.
Set whether or not the audio outputs during tone search.
OFF Does not mute the audio during the tone search operation.
ON Mutes the audio during the tone search operation.
58 TS SPD
Setting of the tone search speed.
Set the tone search speed.
FAST Speed up the tone search operation.
SLOW Slow down the tone search operation.
59 VER.INF
Displays the CPU and DSP firmware version of the transceiver.
Displays the firmware version of the transceiver.
C x.xx The software versions of “CPU” is shown.
D x.xx The software versions of “DSP” is shown.