Operation Manual
18 FT-70DR/FT-70DE Operating Manual
Changing the Transmission Power Level
1. Press the
[
F
]
key, then press the
[
1
](
TX PO
)
key.
2. Rotate the DIAL knob to select one of the follow-
ing transmission power levels.
TX PO Level Icon PO meter
HIGH
(
5 W
)
*
(
off
)
MID
(
2 W
)
LOW
(
0.5 W
)
*The default setting.
3. Press the PTT switch to save the setting and return to the normal operation.
The transmission power level may be set separately for each frequency band.
Locking Keys and DIAL knob
1. Press the
[
POWER
]
(
LOCK
)
switch, “LOCK”
is displayed on the LCD for one second, the
“
” icon appears on the LCD, and then the
keys and DIAL knob are locked.
z
The keys, the DIAL knob, and the PTT switch may be selected to be locked using Set Mode
[
30 LOCK
]
(
36
)
.
The default setting is the
[
K+D
]
(
the keys and the DIAL knob are locked
)
.
z
The
[
MONI/T-CALL
]
switch and the VOL switch cannot be locked.
2. Press the
[
POWER
]
(
LOCK
)
switch again, “UNLOCK” will be displayed on the LCD
and keys and the DIAL knob are unlocked.
Programmable key function
The
[
7
]
(
P1
)
and or the
[
8
]
(
P2
)
keys are user programmable, allowing quick access to
the Set Modes that are used most often.
● Assigning Set Mode Items to the Programmable Keys
1. Press and hold the
[
F
]
key, and then rotate the DIAL knob to select the desired Set
Mode item.
2. Press and hold the
[
7
](
P1
)
key or the
[
8
](
P2
)
key.
“P1KEY” or “P2KEY” appears on the LCD and return to the Set Mode.
3. Press the PTT switch to return to the normal operation.
● Recalling the assigned Set Mode item
1. Press the
[
F
]
key and then press the
[
7
](
P1
)
key or
[
8
](
P2
)
key.
The assigned Set Mode item appears on the LCD.
The
[
7
]
(
P1
)
is
[
12 DC VLT
]
(
36
)
and
[
8
]
(
P2
)
key is
[
47 RX MOD
]
(
37
)
as a default
assignment.