Operation Manual

22 FT-70DR/FT-70DE Operating Manual
● In / Out Display
• When another station with the same DG-ID number is within the communication
range, a beep sounds and the "In" is displayed under the GM
(
Group Monitor
)
function icon, and the right side of the MODE/STATUS indicator lights in light blue.
• When all the members are out of the communication range, "out" is displayed and the
MODE/STATUS indicator light is off.
• When a signal from another member station is received, the call sign of the other sta-
tion is displayed on the LCD for about 10 seconds.
When the DG-ID transmit and receive are set to "00" in the factory default setting, all stations In/
Out of range may be received and are displayed, but the other stations that set their receive DG-
ID number to other than "00" may not be receiving your signals.
Displaying the information of the other station received by GM
(
Group Monitor
)
function
1. When receiving the signals with the same DG-ID number, press the
[
MODE
]
key to
reveal the other station information:
• Depending on the model, the information such as the call sign of the other station,
latitude, longitude and so on may be displayed.
• When receiving the signals of multiple stations, press the
[
MODE
]
key to display
the call sign of the other station, and then rotate the DIAL knob to select the other
stations to be displayed on the LCD.
• Up to 24 stations may be displayed in order of their reception.
z
The FT-70DR/DE may not send its own location information because the FT-70DR/DE is not
equipped with the GPS function.
z
The position information is displayed only when the latitude and longitude information is
included in the signal of the other station.
z
The transceivers that may transmit position information with the GM function are as follows:
(
As of Nov. 2017
)
.
FTM-400XD / FTM-400D series, FTM-100D series, FT2D, FT1XD, FT1D, FT-991A / FT-991*
(
*: Latitude and longitude setting must be entered manually, or an external GPS device must be connected.
)
.
Switch by the [MODE] key
Select by the DIAL konb Select by the DIAL konb
Switch by the [MODE] key
Switch by the [MODE] key
Switch by the [MODE] key
Call Sign 1 Call Sign 2
Call Sign 24
Latitude
*
2
Longitude
*
2
Group Mode Display
(Automatically switching display)
GM information screen
Memory Tag Display
*1
Frequency DisplayOwn DG-ID Number Display
*
1:Memory tag display is displayed in the case of the
memory channel or the home channel setting the
memory tag.
*
2: the Latitude and longitude are displayed only when position
information is included in the signal of the other station.
When the callsign or latitude/longitude is being displayed, the displayed station is given priority. So
even when another station is received the display is not changed. While using the callsign display
screen, rotate the DIAL knob to select another station display.