Operation Manual

26 FT-70DR/FT-70DE Operating Manual
Clearing Memories
1. Press the
[
V/M
]
key to enter the memory mode.
2. Press and hold the
[
V/M
]
key.
3. Rotate the DIAL knob to select the memory chan-
nel from which the data is to be cleared.
4. Press the
[
AMS
]
key.
5. Confirmation screen “M-MSK?” is displayed and
then press the
[
AMS
]
key again to clear the mem-
ory channel.
z
Data on memory channel One, and the Home channel may not be cleared.
z
The cleared memory can be restored using the following steps.
Press the
[
V/M
]
key to enter the memory mode

Press and hold the
[
V/M
]
key

Rotate the
DIAL knob to restore the channel

Press the
[
AMS
]
key
Recalling the Home Channels
1. Press the
[
F
]
key, and then press the
[
HM/RV
]
key.
“H” and the home channel frequency of the cur-
rently selected band appears on the LCD.
2. Press the
[
F
]
key, and then press the
[
HM/RV
]
key or the
[
V/M
]
key to return to the previous fre-
quency.
Home channel
indication
While recalling the home channel, rotate the DIAL knob to transfer the home channel frequency
to the VFO operating band. The home channel frequency can be set not to be transferred in the
Set Mode
[
27 HM-VFO
] (
36
)
.
Changing the Home Channel Frequency
1. Set the frequency and the operating mode you want to store as a home channel.
2. Press and hold the
[
HM/RV
]
key.
The beep sounds and the home channel frequency is changed.
For additional details on the following functions, refer to the Advanced Manual which may be
downloaded from the Yaesu website.
Split Memory
Two different frequencies, one for receive and another for transmit, can be registered to
a memory channel.
Using Memory Tag
Memory name tags may be assigned to the memory channels and home channels.
Using Memory Bank
The transceiver allows using up to 24 memory banks to allow sorting and registering the
channels in convenient groups.