Operation Manual

36 FT-70DR/FT-70DE Operating Manual
Tables of Set Mode Operations
No.
Set Mode
item
Description
Selectable options
(
Options in bold are the default settings
)
1 ANT.ATT Switch the attenuator between ON/OFF. OFF / ON
2 APO
Set the length of time until the transceiver
turns off automatically.
OFF / 0.5 Hours to 12 Hours
3 BCLO
Turns the busy channel lockout function on/off.
OFF / ON
4 BEEP Sets the beep sound function. OFF / KEY+SC / KEY
5 BEP.LVL Beep volume setting LEVEL1 – LEVEL4 – LEVEL7
6 BEP.EDG
Sets the beep sound ON or OFF when a
band edge is encountered.
OFF / ON
7 BEP.STB
Sets the beep sound ON or OFF when the
other station completes transmission in the
Digital Mode.
OFF / ON
8 BELL Set the bell function settings.
OFF / 1 T–20 T / CONT
(
Continuous ringing
)
9 BNK.NAM Assign a name to each memory bank.
(
up to 6 characters
)
10 BSY.LED
Turn the MODE/STATUS Indicator ON or
OFF while receiving signals.
LED.OFF / LED.ON
11 CLK.SFT Set the clock shift function. A / B
12 DC VLT Display the voltage.
(
Voltage
)
13 DCS.INV
Select a combination of DCS inversion
codes in terms of communication direction.
RXN.TXN / RXR.TXN / RXB.TXN / RXN.
TXR / RXR.TXR / RXB.TXR
14 DIMMER
Set the brightness level of the LCD back
light and numeric keypad light.
LEVEL1 – LEVEL6
15 DIG.POP Set the POP UP display time. OFF / 2 SEC – 10 SEC – 60 SEC / CONT
16 DIG VW Turn the VW mode selection ON or OFF. ON/OFF
17 DP-ID DP-ID list
(
Display/Register/Clear
) (
Registered DP-ID
)
18 DT DLY
Set the DTMF code transmission delay time. 50MS / 250MS / 450MS / 750MS / 1000MS
19 DT SET
Select and edit the DTMF auto dialer mem-
ory channel.
CH0 / CH1 – CH9
20 DT SPD Set the DTMF code transmission speed. 50 MS / 100 MS
21 DW INT
Set the priority memory channel monitoring
interval during Dual Receive.
0.1 S – 5.0 S – 10.0 S
22 DW RSM
Configure the scan stop mode settings for
Dual Receive.
2.0 S – 10.0 S / BUSY / HOLD
23 DW RVT
Turn the “Priority Channel Revert” feature
ON or OFF during Dual Receive.
OFF / ON
24 GM RNG
Select the beep option while receiving digi-
tal GM information.
OFF / IN RNG /ALWAYS
25 GM INT
Set the transmission interval of digital GM
information.
OFF / NORMAL / LONG
26 HM/RV
Select the function of the
[
HOME/REV
]
key. HOME / REV
27 HM-VFO
Turn transfer VFO to the Home channel ON or OFF. OFF / ON
28 LAMP
Set the duration time of the back light and
keys to be lit.
OFF / 2 SEC – 5 SEC – 10 SEC / CONT
29 LED.LGT Turn ON the LED light.
(
LED lights up
)
30 LOCK Configure the lock mode setting.
KEY / DIAL / K+D / PTT / K+P / D+P / ALL
31 MCGAIN Adjust the microphone gain level. LEVEL1 – LEVEL5 – LEVEL9