Operation Manual

4 FT-70DR/FT-70DE Operating Manual
DIAL Knob
(
15
)
• Rotate the DIAL Knob to change the frequency or select a memory channel.
While pressing and holding the VOL Switch, rotate the DIAL knob to adjust the
audio volume level.
• Rotate the DIAL Knob to select the desired entry for set mode.
MODE/STATUS Indicator
Indicates the transmit/receive status, and the communication mode with the high
brightness LED.
Communication status Left portion Right portion
Receiving
Analog FM mode
Green
Green
Digital C4FM mode Blue
Digital Data White
Receiving signals with unmatched DG-ID,
DP-ID, tone frequency or DCS code
Blink in blue
Transmitting
Analog FM mode
Red
Red
Digital C4FM mode Blue
GM function
during opera-
tion
The other station is within the com-
munication range
Light Blue
Transmitting GM confirmation signal
to the other station within the commu-
nication range
Blue
Speaker
Keypad
The functions of the keypad are described in detail on page 5.
MIC/SP jack*
• Connect a speaker microphone or earpiece microphone to this jack.
Connect the optional Clone Cable
(
CT-27
)
, to transfer saved data and function
settings to another FT-70DR/DE transceiver.
Do not connect any microphone which is not specified by Yaesu.
A malfunction may can result.
When an external microphone or cable is connected, the dust and splash protection does
not function.
DATA Terminal*
• When updating the firmware, connect to a PC using a USB cable.
* When a new firmware update for the FT-70DR/DE is available, download the
data from the YAESU website to update the FT-70DR/DE to the latest version.
* NOTE: the optional camera-equipped microphone
(
MH-85A11U
)
is not supported.
EXT DC IN Jack*
(
13
)
When charging the battery pack, connect the battery charger to this jack.
Connect an external power supply adapter with a cigarette lighter plug
(
SDD-13
)
or an external power cable
(
E-DC-6
)
to this jack.
Strap Hole
(
12
)
*: When the included antenna and battery pack are installed and the MIC/SP jack, DATA terminal,
and EXT DC IN jack are securely covered with rubber caps, the FT-70DR/DE meets the water-
proofing performance conforming to IP54.