Operation Manual

70 FT-7800R OPERATING MANUAL
Menu #16
[
HM/REV
]
Function: Selects the alternate function (press and hold in) of the
[
TONE
(
HM/RV
)]
key
and primary function (press momentarily) of the
[
V/M
(
MW
)]
key.
Available Values: REV/HOME
Default: REV
Menu #17
[
HYPER
]
Function: Enables/disables the Automatic Writing feature for the Hyper Memory.
Available Values: MANUAL/1-AUTO/AUTO
Default: 1-AUTO
MANUAL: Disables the Automatic Writing feature.
1-AUTO: Enables the Automatic Writing feature to the Hyper Memory “1” only. The
Hyper memory data changes automatically when the radio’s configuration is
changed (such as Mode change, Band change, etc.). Disable the Automatic
Writing feature to the Hyper Memory “2” through “5.”
AUTO: Enables the Automatic Writing feature to the all Hyper Memoirs.
Menu #18
[
I NET
]
Function: Selects the Internet Connection mode.
Available Values: INT.COD/INT.MEM
Default: INT.COD
INT.COD: Sets up the Internet Connection mode for WIRES
TM
access.
INT.MEM: Sets up the Internet Connection mode for other (DTMF string) Internet Link
System access.
Menu #19
[
INT CD
]
Function: Selects the Access Number (DTMF digit) for WIRES
TM
operation.
Available Values: CODE “0” ~ CODE “9,” CODE “A,” CODE “B,” CODE “C,” CODE
“D,” CODE “E(),” CODE “F(#)”
Default: CODE “1”
MENU
(
“SET”
)
MODE
Primary function of the
[V/M(MW)] key
Press the
[
V/M
(
MW
)]
key momentarily
to switch the frequency control among
the VFO, Memory System, and Home
channel.
Press the
[
V/M
(
MW
)]
key momentarily
to switch the frequency control be-
tween the VFO and Memory System.
Alternate function of the
[TONE(HM/RV)] key
Press and hold in the
[
TONE
(
HM/RV
)]
key for 1/2 second to reverse the
transmit and receive frequencies dur-
ing repeater operation.
Press and hold in the
[
TONE
(
HM/RV
)]
key for 1/2 second to recall a favorite
“Home” channel.
Selection
REV
HOME